Page 1
OPERATING MANUAL Setting up Dyson Link app 1. Download the Dyson Link app, 3. Input the above information 2. Select ‘Add a Product’ from available on iOS and Android. when requested to do so. within the app and follow the on screen instructions.
Page 2
Website: www.dyson.com.au Email: aucustomercare@dyson.com DYSON APPLIANCE. Dyson Customer Care: 1800 239 766 (Mon-Fri 8:00am to 6:00pm EST, Sat-Sun 8:30am to 4:00pm EST). Address: Dyson Appliances (Aust.) Pty Limited, PO Box 2835, Taren Point, After registering your 2 year Dyson guarantee, your Dyson NSW 2229 Australia.
3. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Customer Care Helpline. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
Dyson Customer Care Helpline. 26. Contact the Dyson Customer Care Helpline when service or repair is required. Do not disassemble the appliance as incorrect reassembly may result in an electric shock or fire.
Setting up Dyson Link app The appliance can be enhanced when connected to the Dyson Link app on your smart device. Product SSID XXXXX-XXX-XX-XXXXXXXX-XXXX Product Wi-Fi Password XXXXXXXX Mac address X X:X X:X X:X X:X X:X X 1. Download the Dyson Link app, 2.
Page 6
Heating and fan modes Appliance is in fan mode Press the blue fan mode button to enter fan mode. The On first use, the appliance will default to a temperature 3°C power button light will change from red to blue to indicate higher than the detected room temperature.
For additional control the Dyson Link app can be used to further adjust the sensitivity of the appliance. A period of 6 days is required after the appliance is first used for the sensor to calibrate. During this period the appliance may be more sensitive to VOCs (such as odours) than normal.
Night mode The night mode will dim the display and run quietly, making it ideal for use while sleeping. When night mode is enabled (indicated by an illuminated half moon symbol in the bottom right corner of the display), the display will dim and after 5 seconds will fade to off. The 5 secs half moon symbol remains illuminated.
Sleep timer Tilt function The sleep timer will turn your appliance off once the time set has passed. To set the sleep timer, select the desired time. When time reaches zero, the appliance will go into standby mode. Carefully hold the base and the main body. Tilt the amplifier To cancel, decrease the time until two dashes appear.
Page 10
If the appliance has been in use, leave for 1 to 2 hours before replacing the filter unit to allow the appliance to cool down completely. Your Dyson appliance is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day.
Page 11
LED display. return to its normal usage. The Dyson Link app will notify you when your non-washable filter needs to be replaced. The filter indicator can also be 6 sec reset from within the Dyson Link app.
If you clear your network settings the appliance will not connect to the Dyson Link app. Troubleshooting If you see a flashing ‘E’ when trying If you see a solid ‘E’ when trying to use...
When your Dyson appliance reaches the end of its life, we are responsible for its safe disposal. You can send your old Dyson appliance back to us (at our cost) and we will organise for it to be recycled.* LOOKING AFTER YOUR DYSON APPLIANCE *Please note that not all parts are recyclable.
Page 14
When you register, you will have the opportunity to choose whether you would like to receive communications from us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest innovations. We never sell your information to third parties and only use information that you share with us as defined by our privacy policies which are available on our website privacy.dyson.com...
Privacy Act Dyson Appliances (Aust.) Pty Limited (Dyson) may collect and use your personal information to provide you updates on latest products and services, to analyse and research customer’s choice on products, to provide products and services you have requested and for other purposes relating or incidental to product guarantee (e.g.