Table of Contents
Advertisement
Pairing the TV to the Samsung Smart Remote
Installing batteries into the Samsung Smart Remote
Using the TV Controller
Turn on the TV with the TV Controller button on the bottom of the TV and then use the control menu. The Control
menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the
figure below.
When you turn on the TV for the first time, the Samsung Smart Remote
pairs to the TV automatically. If the Samsung Smart Remote does not pair
to the TV automatically, point it at the remote control sensor of the TV, and
then press and hold the buttons labelled
simultaneously for 3 seconds or more.
To install the batteries, push the rear cover open in
the direction of the arrow and insert the batteries as
shown in the figure. Make sure that the positive and
negative ends are facing in the correct direction.
- Alkaline batteries are recommended for longer
Control menu
: Power off
: Channel Up
: Channel Down
English - 5
and
in the following figure
battery life.
: Volume Up
: Volume Down
: Source
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom
of the TV.
Advertisement
Table of Contents
