Immergas SMARTECH PLUS Instructions And Warnings

Code 1.044741 - Rev. ST.005019/004 - 10/2022
T he manufacturer Immergas S.p.A., hereby declares that the "Smartech Plus" radio appliance complies with directive 2014/53/EU.
For further details on the product CE marking, request a copy of the Declaration of Conformity from the manufac-turer, specifying the appliance model and the language of the country.
FOREWORD.
Smartech Plus is a Smart chrono-thermostat designed to guarantee ideal room temperature conditions at any time of the day and night for each individual day of the week. If connected to the Internet via home WiFi, this
device is able to remotely control the air-conditioning system in a simple and efficient way directly from one's smartphone. Smartech Plus consists of Smartech Plus Chrono-ther-mostat (hereinafter Chrono-thermostat)
and Smartech Plus Gateway (hereinafter Gateway).
It can be installed in a few minutes: the Gateway is pow-ered at 230 Volt AC by the mains and must be connected to the generator via communication bus or operation request contact.
While the Chrono-thermostat, with independent battery power supply, does not require any electrical connection and is equipped with an e-ink technology display for displaying the main information such as room
tempera-ture, operation mode, etc. The Chrono-thermostat can be positioned on its table base (supplied in the package), or it can be wall-mounted.
Communication between Gateway and Chrono-thermo-stat is performed via Bluetooth connection, while between Gateway and Immergas Cloud via WiFi.
The system is completed by the "Smartech" application which can be downloaded from the iOS and/or Android Store and installed on the mobile device (smartphone). On completion of installation, the chrono-
thermostat is already operational thanks to the pre-set program inside. Use of the dedicated app makes it extremely easy to program the Smartech Plus system and to completely control all the set values.
GENERAL WARNINGS.
This manual has been drafted for the installer and also includes basic instructions for the end user.
• Carefully read the warnings contained in this document as they provide indications on the technical features as well as the installation, assembly, programming, adjustment and use instructions.
• The device must be installed in compliance with elec-trical installation standards in force.
• This instruction manual and the "Smartech" application manual must be "kept for future reference".
• After having removed the packaging, check the inte-grity of the Gateway, of the Chrono-thermostat and of the power cable supplied. If in doubt, do not use them and contact the Dealer or Manufacturer.
• The Gateway and the Chrono-thermostat are only intended for the use which they have been specifically designed for. Any other use must be considered impro-per and therefore dangerous.
• Our products are manufactured in compliance with current safety standards. During installation and use, it is recommended to observe all the precautions to avoid harming persons or damaging objects.
• Do not disassemble parts of the Gateway or the Chrono-thermostat when they are in operation.
• Do not use the Gateway and the Chrono-thermostat exposed to heat sources or direct sunlight.
• The manufacturer will not be held responsible in the following cases:
a) Incorrect installation.
b) Boiler functioning defects to which the Chrono-thermostat and the Gateway module are connected.
c) Changes or interventions not authorised by the manufacturer.
d) Total or partial failure to comply with instructions.
e) Exceptional events etc.
• B.: the Gateway and the Chrono-thermostat must be installed at least 2 m above the ground;
N.B.: the Gateway and the Chrono-thermostat cannot be installed outdoors;
N.B.: the Gateway and the Chrono-thermostat cannot be installed less than 20 cm from the human body.
CLEANING THE CASE.
Use a dry cloth to clean the cover of the Gateway and of the Chrono-thermostat. Never use abrasive or powder detergents.
WARNING.
Immergas reserves the right to make improvements and changes to details and accessories of the product, excepting the essential features of the model described and illustrated herein.
1. INSTALLATION.
1.1 Installation recommendations.
The Gateway, including the relative cables and connec-tions to the generator, must be installed by specialised staff specifically trained for this purpose. On the free initial check of the Immergas generator, when the
Gateway is inserted into the system, the Immergas authorised After-sales Centre checks the electrical connection and regular operation. The free check just of the Gateway is not envisioned by the Immergas authorised
After-sales Centre if this is requested after the generator warranty has started, or if the Gateway is not connected to an Immergas generator.
Attention: laying the Gateway cables is excluded from the free Immergas generator checks; it is the responsibility of the installer company.
1.2 Package contents.
Ref
1 1 Instruction sheet
2 1 chrono-thermostat installed on the table base
3 1 Gateway module
4
1 cable with integrated 230 Vac - 5 Vdc power supply for the Smartech Plus Gateway power supply connection, including wire sleeves and 120 Ohm resistor for Modbus
connection
5
2 wall-mounted installation supports equipped with spirit level, screws and plugs
6 2 LR03 (AAA) 1.5V batteries
1.3 Main Chrono-thermostat dimensions.
Instructions and warnings IE
SMARTECH PLUS
Smart Chrono-thermostat
Description
71.5 35.5
102
90
Measurements in mm
1
1