Communication Connectors - SolarEdge SE15K Installation Manual

39 Communication Connectors

Communication Connectors

Two communication glands are used for connection of the various communication
options. Each gland has three openings. The table below describes the functionality of
each opening. Unused openings should remain sealed.
Gland# Opening
Com 1
One small
(PG16)
Com 2
All three
(PG13.5)
The communication board has a standard RJ45 terminal block for Ethernet connection,
and a 6-pin terminal block for RS485 connection, as shown below:
Functionality
External antenna cable
RS485
Figure 22: Communication Glands
Figure 23: Internal communication connectors
Cable size (diameter)
Three Phase Inverter with SetApp Configuration
2-4 mm
2.5-5 mm