Chapter 3: Installing the Inverter
Package Contents
Mounting bracket kit
Quick installation guide
Warranty card
Safety instructions page
Technical Specifications page
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the monitoring platform.
Inverter Interfaces
Figure 5 shows an inverter with a DC Safety Unit, located at the bottom of the inverter.
NOTE
The DC Safety Unit is applicable based on the inverter model and country of
installation.
Figure 6 shows the inverter connectors and components, located at the bottom of the
inverter.
Three Phase Inverter with SetApp Configuration
Figure 5: Inverter front view
Chapter 3: Installing the Inverter
20