Related Manuals for Dyson 360 Vis Nav
Summary of Contents for Dyson 360 Vis Nav
-
Page 1: Table Of Contents
360 visnav User manual Contents Getting started Scheduling and reviewing cleans Downloading the MyDyson™ app Looking after your robot Connecting to Wi-Fi Emptying your bin Setting up your dock Washing your filter Setting the language Maintaining your brush bar... -
Page 2: Getting Started
Getting started Tailor your robot with the MyDyson™ app The LCD touchscreen is Set your robot’s behaviour to located on the top of the suit your lifestyle. Have it learn robot between the bin and your home’s layout, so you can LED light ring schedule it to clean when, where and how you want –... -
Page 3: Downloading The Mydyson™ App
If you have changed your Wi-Fi network settings, you may need to re-connect your robot. Follow the ‘Change or add new Wi-Fi network’ instructions to re-connect. If your robot is not connected to the Dyson cloud, try connecting to your robot again later. Changing or adding a new Wi-Fi network Open the settings menu in the MyDyson™... -
Page 4: Setting Up Your Dock
Setting up your dock The power cable should be inserted Choose a location into the socket located It’s important that you locate the dock carefully, as the robot will need clear on the top, right hand access to it. side on the back of the dock. -
Page 5: Setting The Language
Setting the language When you first set up your machine, you’ll need to select the language your robot will use. Settings Scroll up and down, through the languages. Language When the language you’d like is highlighted, press and click the LCD touchscreen to confirm your selection. -
Page 6: Starting A Clean
Starting a clean Use the MyDyson™ app to start your clean or press and click the LCD touchscreen. You can start your clean from the dock or pick up your robot and move it to a specific position. Start from the dock with the MyDyson™ app or voice control Start the clean using either the MyDyson™... -
Page 7: Mapping Your Home
When you clean on a different level of your house, you’ll need to move your robot’s dock to each level and start each mapping mission from the dock. Check www.dyson.com for the option to purchase additional docks. -
Page 8: Zoning Your Home
Zoning your home Once you’ve created a map, follow the instructions on the MyDyson™ app to create zones. Divide your map into zones. Once you divide your map into different zones, you can choose when and how each zone is cleaned. Tap on the map to add zone dividers. -
Page 9: Scheduling And Reviewing Cleans
There Register your robot are sensors on You'll need your serial number, located behind the bin. the front corner edge and two pairs located towards the bin. For more information and support videos for your machine go online: www.dyson.com/support... -
Page 10: Emptying Your Bin
Emptying your bin Empty your bin as soon as the dirt reaches the MAX level The bin removal catch is located behind the screen on the top of the robot. This can Remove your bin be pressed and the bin pulled Press the bin removal catch on the top of your robot and lift your bin away. -
Page 11: Washing Your Filter
LCD touchscreen For more information and support videos for your machine go online: and LED light ring www.dyson.com/support Remove your filter Press the filter unit on the top of your robot and it will pop up. Lift it out of the robot and remove the filter inside. -
Page 12: Maintaining Your Brush Bar
Maintaining your brush bar To maintain optimum performance, check and remove hair and debris from your brush bar at least once a month. Locate the brush bar lever on the base of the robot near the centre and above the brush bar Remove your brush bar Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. -
Page 13: Cleaning Your Camera Lens And Sensors
Use the same cloth to wipe the sensors on the bottom of the machine. For more information and support videos for your machine go online: www.dyson.com/support Locate seven sensors on the base of the machine. Two sensors on either side towards the rear. Two are located on the front corners. -
Page 14: Alerts
Follow the instructions on the MyDyson™ app to clear the alert. If you’re unable to clear the alert, call the Dyson Helpline. Airways blocked Your robot has detected a blockage in the airways, that may require the bin to be emptied. - Page 15 Optics obscured Check your robot’s camera and sensors for dirt, dust, fingerprints and smears, and clean following the instructions in ‘Cleaning your camera lens and sensors’. Place on dock Your robot has a problem and needs you to place it on the dock. Go into Settings on the MyDyson™...
- Page 16 Wheel stuck Lift your robot and check for any obstructions or items that have become entangled round the wheels. Clear any obstruction following the instructions in the ‘Looking after your robot’ section of this manual. Set up a restriction in the MyDyson™ app if this alert continues to happen in a specific area of your home.
-
Page 17: Resetting And Upgrading Software
You’ll need to use a USB stick formatted to FAT32 with at least 1 GB free space. The latest software update and release notes can be found on www.dyson.com/support. This software update should be the only item saved on to the USB stick.