Solid-State Drive Specifications - HP 645 G3 Maintenance And Service Manual

Capacity
NAND Type/Size
Height
Width
Interface
Interface Transfer Rate
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical Blocks
Operating Temperature
Security Features
Other Features
*Size refers to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications

SSD 512 GB 2280 M2 PCIe-3x4 SS NVMe
Form-Factor (I/O)
Capacity
NAND Type
Weight
Height
Width
Interface
Sequential Read
Sequential Write
Logical Blocks
Operating Temperature
Security Features
Other Features
SSD 128 GB 2280 M2 SATA-3 Value
500 GB *
N/A
7 mm (0.28 in)
69.85 mm (2.75 in)
ATA-8, SATA 3.0
600 MB/sec
1.5 ms
12 ms
21 ms
976,773,168
0°C to 60°C (32°F to 140°F)[top cover temp]
ATA Security; TCG Opal 2.x, FIPS
S.M.A.R.T., NCQ, Ultra DMA
M.2 2280
512 GB
MLC
10 g (0.02 lb)
2.33 mm (0.09 in)
22 mm (0.87 in)
PCIe NVMe Gen3X4
Up to 3200 MB/s
Up to 1700 MB/s
1,000,215,216
0° to 70°C (32° to 158°F) [ambient temp]
ATA Security (Option)
TRIM; L1.2
Solid-state drive specifications 117