1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer
  5. AP600N
  6. Setup manual

Ricoh AP600N Setup Manual

Ricoh ap600n: setup guide
Hide thumbs Also See for AP600N:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Manual
Getting Started
1
Installing Options
2
Configuring the Printer for the Network
3
Installing the Printer Driver and Software
4
For safe and correct use of this machine, please be sure to read the Safety Information in the
Setup Guide before you use it.

Setup Guide

Advertisement

Table of Contents
loading

Related Manuals for Ricoh AP600N

Summary of Contents for Ricoh AP600N

  • Page 1: Setup Guide

    Getting Started Installing Options Configuring the Printer for the Network Installing the Printer Driver and Software For safe and correct use of this machine, please be sure to read the Safety Information in the Setup Guide before you use it.
  • Page 2 Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This printer contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage. Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

  • Page 3: Table Of Contents

    Memory Unit Type C (SDRAM Module) ... 25 1394 Interface Unit Type 4510...28 Installing the 1394 Interface Unit... 28 Connecting the 1394 Interface Cable to the Printer ...31 802.11b Interface Unit Type A...33 Bluetooth Interface Unit Type 2045...37 Hard Disk Drive Type 2600... 41 AD410 (Duplex Unit) ...43...
  • Page 4 Windows 2000/Windows XP/Server 2003 - Installing the PostScript Printer Driver...72 Windows NT 4.0 - Installing the PostScript Printer Driver...74 Mac OS - Installing the PostScript 3 Printer Driver ... 78 Mac OS X - Installing the PostScript 3 Printer Driver... 81 Installing the Printer Driver Using USB ...83...

  • Page 5: Trademarks

    Ethernet is a registered trademark of Xerox Corporation. Bluetooth is a Trademark of the Bluetooth SIG, Inc. (Special Interest Group) and licensed to RICOH Company Limited. Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights in those marks.

  • Page 6: Safety Information

    Safety Information When using your printer, the following safety precautions should always be fol- lowed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
  • Page 7 R CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.
  • Page 8 Positions of Labels and Hallmarks for R This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. R WARNING and R R CAUTION ZKGH250E...

  • Page 9: Energy Star Program

    Low-power mode. • Energy Saver mode This printer automatically lowers its power consumption 30 minutes after the last operation has been completed. To exit Energy Saver mode, press any key on the control panel. To change the setting of the Energy Saver mode, see “System Menu”...

  • Page 10: Manuals For This Printer

    Manuals for This Printer The following manuals describe the operational procedures and maintenance of this machine. To enhance safe and efficient operation of this printer, all users should read and follow the instructions carefully. ❖ ❖ ❖ ❖ Quick Installation Guide Describes how to install the printer.

  • Page 11: How To Read This Manual

    How to Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: This symbol indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

  • Page 13: Getting Started

    Note ❒ Some of your applications might require the installation of the PCL 5e printer driver. In this case, you can install PCL 5e in addition to PCL 6. See p.64 “Installing the PCL 6/5e Printer Driver” 1. Getting Started...
  • Page 14 ❖ ❖ ❖ ❖ RPCS printer driver This printer driver allows the computer to communicate with the printer via a printer language. The preset type user interface is provided in addition to the conventional one. See p.67 “Installing the RPCS Printer Driver”...

  • Page 15: Software And Utilities Included On The Cd-Rom

    Software and Utilities Included on the CD- There are three CD-ROMs that come with this printer. These are labeled "Oper- ating Instructions", "Printer Drivers and Utilities" and "Document Management Utility". The following are included on the three separate CD-ROMs. ❖ ❖ ❖ ❖ Font Manager 2000 Helps you to install new screen fonts, or organize and manage fonts already installed on the system.

  • Page 16: Viewing The Contents Of The Cd-Rom

    Getting Started Viewing the Contents of the CD-ROM Follow the steps to view the contents of the CD-ROM. A A A A Insert the CD-ROM into the CD-ROM drive. Auto Run will start the installer. B B B B Click [Browse This CD-ROM]. Explorer starts and displays the contents of the CD-ROM.

  • Page 17: Guide To This Printer

    Up to 100 sheets of plain paper (80 , 20 lb. bond) can be loaded. See “Paper and Other Media Supported by this Printer” and “ Loading Paper in the Bypass Tray” in the Printer Refer- ence on the CD-ROM labeled "Operat-...
  • Page 18 Front Cover Release Button Use this button to open the front cov- Power Switch Use this switch to turn the printer power on and off. Paper Tray (Tray 1) Loads up to 500 sheets of plain paper (80 g/m , 20 lb.
  • Page 19 Registration Roller Feeds the paper. If it becomes dirty, clean it. See “Cleaning the Registration Roller” in the Printer Reference on the CD-ROM labeled "Operating Instructions". Guide to This Printer [Back side] Transfer Roller Cover Open this cover when replacing a transfer roller.

  • Page 20: Control Panel

    { { { { Form Feed} } } } key If the printer is offline, press this key to print all the data left in the printer's input buffer. Note ❒ This does not work if the printer is on- line. Menu Escape Enter...
  • Page 21 Press this key to make and check the cur- rent printer settings. See “Making Printer Settings with the Con- trol Panel” in the Printer Reference on the CD-ROM labeled "Operating Instruc- tions". { { { { Escape} } } } key Press this key to return to the previous condition on the panel display.
  • Page 22 Getting Started...

  • Page 23: Installing Options

    R CAUTION: • Be sure to turn off the printer and wait for about an hour before installing options. Not waiting for the printer to cool down can result in a burn. • When lifting the printer, use the inset grips on both sides of the printer, oth- erwise the printer might fall and cause personal injury.

  • Page 24: Available Options

    Installing Options Available Options The following options can be attached to the printer. ❖ ❖ ❖ ❖ Exterior Paper Feed Unit Type 600 (Tray 2 or Tray 3) You can load up to 500 sheets (60- 105g/m , 16-28 lb.bond) of plain pa- per into the tray.
  • Page 25 ❒ The 1-bin Shift Sort Tray and the Mailbox cannot be installed to the printer at the same time. ZKGX121E Bluetooth Interface Unit Type 2045 The printer can be used as a Blue- tooth printing device. Note ❒ The 1394 Interface Unit, Bluetooth Interface Unit and the 802.11b In-...

  • Page 26: Paper Feed Unit Type 600

    Installing Options Paper Feed Unit Type 600 R CAUTION: • The printer weighs about 20 kg (44.1 lbs.). • When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or cause injury if dropped.
  • Page 27 , s e e "Adjusting the Registration of the Trays" in the Printer Refer- ence. ZKGH052E . If you...

  • Page 28: Envelope Feeder Type 2600

    C C C C Lift the front of the Envelope Feeder, and slide it carefully into the printer until it stops. Reference For information about loading paper, see "Loading Envelopes" in the Printer Reference on the CD-ROM labeled "Operating Instructions". ZKGP330E ZKGP340E...

  • Page 29: Memory Unit Type C (Sdram Module)

    Be sure to check the following points: • The power switch is turned off. • The interface cable is un- plugged from the printer. Note ❒ If the Duplex Unit is not at- tached, go to step C C C C...
  • Page 30 Match the controller board to the top and bottom rail using the "T T T T " mark, and then slide it into the printer slowly until it stops. ZKGX260E K K K K Push the handle of the controller board until it clicks.
  • Page 31 M M M M While aligning the power cord to the left side groove of the Duplex Unit, slide the Duplex Unit in un- til it is connected to the printer. N N N N Attach the interface cable to the printer.

  • Page 32: 1394 Interface Unit Type 4510

    ❒ Depending on the model you use, the 1394 Interface Unit, the 802.11b Interface Unit and the Bluetooth Interface Unit cannot be installed in the printer at the same time. For more information, see p.19 “In- stalling Options”. Important ❒ Printing using "SCSI print "(Win- dows 2000) device and "IEEE 1394...
  • Page 33 C C C C If the Duplex Unit is attached, push down the lever on right side (A A A A ) and pull out the Duplex Unit until it stops (B B B B ). D D D D Remove the two screws holding the controller board in place.
  • Page 34 Match the controller board to the top and bottom rail using the "T T T T " mark, and then slide it into the printer slowly until it stops. L L L L ZKGX421E Push back the handle of the con- troller board until it clicks.

  • Page 35: Connecting The 1394 Interface Cable To The Printer

    While aligning the power cord to the left side groove of the Duplex Unit, slide the Duplex Unit in un- til it is connected to the printer. O O O O Plug the printer's power cord back into the wall outlet, and then turn on the power switch.
  • Page 36 Installing Options - 1394 Interface Unit specifications ❖ ❖ ❖ ❖ Interface Connector: IEEE 1394 (6 pins × 2) ❖ ❖ ❖ ❖ Required cable: 1394 interface cable (6 pins x 4 pins, 6 pins x 6 pins) Important ❒ You cannot plug devices togeth- er to create loops.

  • Page 37: 802.11B Interface Unit Type A

    ❒ Depending on the model you use, the 802.11b Interface Unit, the 1394 Interface Unit, and the Bluetooth Interface Unit cannot be installed to the printer at the same time. For more information, see p.19 “In- stalling Options”. Important ❒ Before touching the 802.11b Inter- face Unit, touch something metal to discharge any static electricity.
  • Page 38 Installing Options E E E E Pull out the handle of the control- ler board. F F F F Pull the handle and slide the con- troller board out. G G G G Place the controller board on a flat surface.
  • Page 39 Match the controller board to the top and bottom rail using the "T T T T " mark, and then slide it into the printer slowly until it stops. 802.11b Interface Unit Type A M M M M Push back the handle of the con- troller board until it clicks.
  • Page 40 While aligning the power cord to the left side groove of the Duplex Unit, slide the Duplex Unit in un- til it is connected to the printer. Q Q Q Q Plug the printer's power cord back into the wall outlet, and then turn on the power switch.

  • Page 41: Bluetooth Interface Unit Type 2045

    ❒ Depending on the model you use, the 802.11b Interface Unit, the 1394 Interface Unit, and the Bluetooth Interface Unit cannot be installed to the printer at the same time. For more information, see p.19 “In- stalling Options”. Important ❒ Before touching the Blutooth Inter- face Unit, touch something metal to discharge any static electricity.
  • Page 42 Installing Options E E E E Pull out the handle of the control- ler board. F F F F Pull the handle and slide the con- troller board out. G G G G Place the controller board on a flat surface.
  • Page 43 Match the controller board to the top and bottom rail using the "T T T T " mark, and then slide it into the printer slowly until it stops. Bluetooth Interface Unit Type 2045 M M M M Push back the handle of the con- troller board until it clicks.
  • Page 44 While aligning the power cord to the left side groove of the Duplex Unit, slide the Duplex Unit in un- til it is connected to the printer. R R R R Plug the printer's power cord back into the wall outlet, and then turn on the power switch.

  • Page 45: Hard Disk Drive Type 2600

    Disk Drive. D D D D Slowly insert the Hard Disk Drive while aligning it with the top and bottom rails in the printer until it stops. E E E E Fasten the two screws (using a coin, etc.) to fix the Hard Disk Drive.
  • Page 46 Hard Disk Drive with the print- er driver to make the printer recognize the installation. See a d e s c r i p t i o n o f W i n d o w s 95/98/Me, Windows 2000 and Windows NT 4.0 on p.61 “In-...

  • Page 47: Ad410 (Duplex Unit)

    E E E E Remove the rear cover in the hor- izontal direction. Note ❒ The rear cover of the printer is not used when attaching the ZKGX310E Duplex Unit. ❒ Store the removed rear cover for possible future use.
  • Page 48 F F F F While aligning the power cord to the left side groove of the Duplex Unit, slide the Duplex Unit in un- til it is connected to the printer. G G G G Attach the interface cable to the printer.

  • Page 49: 1-Bin Shift Sort Tray Type 2600

    1-bin Shift Sort Tray. E E E E Holding the 1-bin Shift Sort Tray on both sides, align the catches with the holes on the printer and insert. R CAUTION: • When lifting the 1-bin Shift Sort Tray, hold it on both sides. Hold-...
  • Page 50 Shift Sort Tray. G G G G Attach the interface cable to the printer. H H H H Plug the printer's power cord back into the wall outlet, and then turn on the power switch. Note ❒ After installing the last option...

  • Page 51: Cs380 (Mailbox)

    ❒ The Mailbox and the 1-bin Shift Sort Tray cannot be attached to the printer at the same time. ❒ Check the printer nameplate to confirm the model code. A A A A Check the contents of the box for the following items: •...
  • Page 52 Mailbox from the bottom. H H H H Attach the interface cable to the printer. I I I I Plug the printer's power cord back into the wall outlet, and then turn on the power switch. Note ❒ After installing the last option...

  • Page 53: Configuring The Printer For The Network

    “Installing the Printer Driver and Software”. • Wireless LAN: Make the settings in p.57 “IEEE 802.11b (Wireless LAN) Con- figuration”, and then see p.61 “Installing the Printer Driver and Software”. Note ❒ The optional 1394 Interface Unit is necessary to use IEEE 1394.

  • Page 54: Host Interface

    Configuring the Printer for the Network A A A A Press { { { { Menu} } } } . Menu On Line Job Reset Escape Form Feed Power Error “Menu” appears on the panel dis- play. B B B B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display “Host...
  • Page 55 “Net- work Setup” setting screen. Ethernet Configuration I I I I If you use TCP/IP, assign the IP address to the printer. Note ❒ To get the IP address for the printer, contact your network administrator.
  • Page 56 Configuring the Printer for the Network E Repeat steps C C C C and D D D D to enter the IP address. IP Address: 192.168.000.011 Check if the pointer (k) is at the rightmost position, and press { { { { Enter #} } } } to register the IP ad- dress you selected.
  • Page 57 . S e e "Printing a Configuration Page" in the Printer Reference. The settings are now complete. Go to p.61 “Installing the Printer Driv- er and Software”. Data In ZKGP010E...

  • Page 58: Ieee 1394 Configuration

    Configuring the Printer for the Network IEEE 1394 Configuration Use this procedure to configure the printer for use in the IEEE 1394 envi- ronment. The following table shows the control panel settings and their default values. These items are in- cluded in the "Host Interface"...

  • Page 59: Ip Over 1394

    Note ❒ To get the IP address for the printer, contact your network administrator. A Press { { { { U U U U } } } } or { { { { T T T T } } } } until the fol- lowing message appears.

  • Page 60: Scsi Print

    Configuring the Printer for the Network D Press { { { { Enter #} } } } . The pointer (k) moves to the next entry field automatically. IP Address1394: 192.00k.000.000 Note ❒ The value moves by 10 if { { { { U U U U } } } } or { { { { T T T T } } } } is kept pressed.

  • Page 61: Ieee 802.11B (Wireless Lan) Configuration

    IEEE 802.11b (Wireless LAN) Configuration Configure the printer for using the wireless LAN. The following table shows the control panel settings and their default values. These items are included in the "Host Interface" menu. Setting Name Value Comm. Mode 802.11 Ad hoc Channel •...
  • Page 62 Configuring the Printer for the Network F F F F Press { { { { Enter #} } } } . The following message appears on the panel display. Comm. Mode: *802.11 Ad hoc G G G G Press { { { { U U U U } } } } or { { { { T T T T } } } } to select the transmission mode.
  • Page 63 B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se- lect characters, and then press the { { { { Enter #} } } } key. SSID: [ 1] The cursor (k) moves to the next...
  • Page 64 Configuring the Printer for the Network E Continue entering. Note ❒ You can enter either 10 or 26 characters. If the key you en- ter is not 10 or 26 characters long, the following message appears: Error: Enter 10 or 26 characters ❒...

  • Page 65: Installation Method

    When the printer is connected to the computer using USB, see p.83 “Installing the Printer Driver Using USB”. When the printer is connected to the computer using IEEE 1394, see p.86 “In- stalling the Printer Driver Using IEEE 1394”. Important ❒...

  • Page 66: Quick Install

    ❒ If your system is Windows 2000/Windows XP/Server 2003 or Windows NT 4.0, installing a printer driver by Auto Run requires Administrators permis- sion. When you install a printer driver by Auto Run, log on using an account that has Administrators permission.
  • Page 67 After reading through all of the contents, click [I accept the agreement] to agree with the license agreement, and then click [Next]. F F F F Click to select a model name you want to use when the "Select Printer" di- alog box appears. Note ❒...

  • Page 68: Installing The Pcl 6/5E Printer Driver

    Installing the Printer Driver and Software Installing the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer Driver Two kinds of PCL printer drivers, PCL 6 and PCL 5e, are provided with this printer. We recommend PCL 6 as your first choice. Limitation ❒...
  • Page 69 After reading through all of the contents, click [I accept the agreement] to agree with the license agreement, and then click [Next]. F F F F Select the printer driver you want to install when the "Select Program" di- alog box appears. G G G G Follow the instructions on the screen.

  • Page 70: Setting Up Options

    Installing the Printer Driver and Software Setting Up Options Important ❒ If the printer is equipped with certain options, you should set up the options with the printer driver. Limitation ❒ In Windows 2000/Windows XP/Server 2003, changing the printer settings requires Manage Printers permission.

  • Page 71: Installing The Rpcs Printer Driver

    ❒ If your system is Windows 2000/Windows XP/Server 2003 or Windows NT 4.0, installing a printer driver by Auto Run requires Administrators permis- sion. When you install a printer driver by Auto Run, log on using an account that has Administrators permission.
  • Page 72 Installing the Printer Driver and Software F F F F Select the RPCS printer driver when the "Select Program" dialog box ap- pears. G G G G Follow the instructions on the screen. Note ❒ During installation in Windows 2000, the [Digital Signature Not Found] dialog box may appear.

  • Page 73: Setting Up Options

    Setting Up Options Important ❒ If the printer is equipped with certain options, you should set up the options with the printer driver. Limitation ❒ In Windows 2000/Windows XP/Server 2003, changing the printer settings requires Manage Printers permission. Members of the Administrators and Power Users groups have Manage Printers permission by default.

  • Page 74: Installing The Postscript Printer Driver

    ❒ Never have two versions of the same printer driver installed on your sys- tem at the same time. When upgrading to a new version of the printer driv- er, delete the old version, and then install the new one.
  • Page 75 Follow the instructions on the screen. Setting up options Important ❒ If the printer is equipped with certain options, you should set up the options with the printer driver. A A A A Click [Start] on the taskbar, point to [Settings], and then click [Printers].

  • Page 76: Windows 2000/Windows Xp/Server 2003 - Installing The Postscript Printer Driver

    ❒ Never have two versions of the same printer driver installed on your sys- tem at the same time. When upgrading to a new version of the printer driv- er, delete the old version, and then install the new one.
  • Page 77 In this case, click [Continue Anyway] to continue the installation. Setting up options Important ❒ If the printer is equipped with certain options, you should set up the options with the printer driver. Limitation ❒ Changing the printer settings requires Manage Printers permission. Members of the Administrators and Power Users groups have Manage Printers permis- sion by default.

  • Page 78: Windows Nt 4.0 - Installing The Postscript Printer Driver

    ❒ Never have two versions of the same printer driver installed on your sys- tem at the same time. When upgrading to a new version of the printer driv- er, delete the old version, and then install the new one.
  • Page 79 When you set up options, log on using an account that has Manage Printers permission. Important ❒ If the printer is equipped with certain options, you should set up the options with the printer driver. A A A A Click [Start] on the taskbar, point to [Settings], and then click [Printers].
  • Page 80 • Under Windows 95/98/Me, [Enable bidirectional support for this printer] must be selected in [Spool Settings…] on the [Details] tab with RPCS printer driver. • Under Windows 2000/Windows XP/Server 2003 and Windows NT 4.0, [Enable bidirectional support] must be selected and [Enable printer pooling] must not be selected on the [port] tab with RPCS printer driver.
  • Page 81 - Cautions when connecting the USB interface cable and the IEEE 1394 interface cable Limitation ❒ Do not unplug the cable while printing. Do not turn off the printer power while printing or during bidirectional transmission. Installing the PostScript Printer Driver...

  • Page 82: Mac Os - Installing The Postscript 3 Printer Driver

    If the AdobePS installation starts under Mac OS X, the desktop automatically changes to the Classic environment. If you want to set a printer with Mac OS X, see p.81 “Mac OS X - Installing the PostScript 3 Printer Driver”.
  • Page 83 On the [Apple] menu, select [Chooser]. B B B B Click the [Adobe PS] icon. C C C C In the [Select a PostScript Printer:] list, click the name of the machine you want to use. D D D D Click [Setup].
  • Page 84 Installing the Printer Driver and Software Installing the Adobe Type Manager Note ❒ Close all applications that are running before the installation. Install ATM af- ter restarting the computer. A A A A Start the Macintosh. B B B B Insert the CD-ROM into the CD-ROM drive.

  • Page 85: Mac Os X - Installing The Postscript 3 Printer Driver

    J J J J Restart the Macintosh. Mac OS X - Installing the PostScript 3 Printer Driver This section describes how to configure a Mac OS X to use Ether Talk. The fol- lowing procedure describes how to configure Mac OS X 10.1. If you are not using Mac OS X 10.1, see the manual that comes with your version of the Mac OS X for...
  • Page 86 If the zone has been set, select the zone in the second pop-up menu. C C C C Select the PPD file of the model you are using on the [Printer Model:] pop-up menu, and then click [Add]. Setting Up Options Limitation ❒...

  • Page 87: Installing The Printer Driver Using Usb

    [New Hardware Found], [Device Driver Wizard] or [Found New Hardware Wizard] di- alog box appears depending on the system used. If the printer driver is already installed, the "plug and play" is displayed, and the printer with its port directed to the USB cable is added to the "Printers" folder.

  • Page 88: Windows 2000/Windows Xp/Server 2003-Installing The Printer Driver Using Usb

    With Windows XP/Server 2003, even if the printer driver has already been in- stalled, [Found New Hardware Wizard] may start when connecting the printer and the computer with the USB cable for the first time. In this case, install the printer driver by following the procedure below.

  • Page 89: Mac Os-Creating A Desktop Printer Icon

    D D D D Click [Change] in [USB Printer Selection]. E E E E Select the model you are using in [Select a USB Printer:], and then click [OK]. F F F F Click [Auto Setup] in [PostScript G G G G Click [Create].

  • Page 90: Installing The Printer Driver Using Ieee 1394

    Windows 2000 and Windows XP/Server 2003. Important ❒ Do not connect new IEEE 1394 or USB devices to the printer or turn on the printer while installing the printer driver. ❒ Before uninstalling the printer driver, be sure to disconnect the 1394 interface cable from the computer.
  • Page 91 In this case, click [Yes] to continue the installation. ❒ If the printer driver is already installed, the printer icon is automatically added to the [Printer] folder. In such a case, installation of the printer driver is not necessary. ❒ When the installation is complete, the printer with its port directed to "1394_00n"...
  • Page 92 B B B B In the [Found New Hardware Wizard] dialog box, confirm that [This wizard helps you install software for: (printer name)] is displayed, and select [Install from a list on specific location (Advanced)], and then click [Next>]. C C C C When the [Please choose your search and installation option.] messages appears,...

  • Page 93: Printing With Ip Over 1394

    Preparation "IP over 1394" must be set on the control panel and an IP address for the IEEE 1394 must be specified. For more information about how to make printer settings, see p.54 “IEEE 1394 Configuration”. Limitation ❒ When using the IEEE 1394 (IP over 1394) interface in a network, the Ethernet interface cannot be used in the same network.
  • Page 94 Installing the Printer Driver and Software ❖ ❖ ❖ ❖ If you do not want to install the printer when [Found New Hardware Wizard] starts with an operating system, which supports SCSI print, inactivate the device by fol- lowing the procedures.

  • Page 95: Installing The Smartnetmonitor For Client/Admin

    ❒ If your system is Windows 2000/Windows XP/Server 2003 or Windows NT 4.0, installing software by Auto Run requires Administrators permission. When you install a printer driver by Auto Run, log on using an account that has Administrators permission. A A A A Close all applications that are running.

  • Page 96: Installing The Font Manager 2000

    ❒ If your system is Windows 2000/Windows XP/Server 2003 or Windows NT 4.0, installing software by Auto Run requires Administrators permission. When you install a printer driver by Auto Run, log on using an account that has Administrators permission. A A A A Close all applications that are running.

  • Page 97: Using Adobe Pagemaker Version 6.0, 6.5, Or 7.0

    ❒ If the driver is not set correctly after copying the “.ppd” file, printing may not be performed properly. ❒ When using PageMaker, the optional features that can be selected by the printer driver will not be active. The following procedure describes how to activate the optional printer features. On the [File] menu, click [Print].

  • Page 98: Index

    INDEX 1394 Interface Unit Type 4510 , 21 , 28 1-bin Shift Sort Tray Type 2600 , 21 , 45 802.11b Interface Unit Type A , 21 , 33 Active Protocol , 49 AD410 , 21 , 43 Bluetooth Interface Unit Type 2045 , 21 , 37 Bypass Tray , 13 Bypass Tray Extension , 13 Caution , 2...
  • Page 99 Windows 95/98/Me, installing , 70 Windows NT 4.0, installing , 74 Power Cord , 14 Power indicator , 16 Power Switch , 14 printer driver , 9 Printer Reference , 6 Quick Install , 62 Quick Installation Guide , 6 Rear Cover , 14...
  • Page 100 G091-8641...
  • Page 101 Properly shielded cables must be used for connections to host computer (and/or peripheral) in order to meet FCC emission limits. Network interface cable with ferrite core must be used for RF interference suppression. Declaration of Conformity Product Name: Laser Printer Model Number: Aficio AP600N/MLP32/P7132n/LP032 Responsible party: Ricoh Corporation Address: 5 Dedrick Place, West Caldwell, NJ 07006 Telephone number: 973-882-2000 This device complies with part 15 of FCC Rules.
  • Page 102 EN USA G091-8641...

Table of Contents