Advertisement
![]() | Result lower than 10 mg/dL (0.6 mmol/L) |
![]() | Result higher than 600 mg/dL (33.3 mmol/L) |
![]() | code chip not correctly inserted into the meter or missing |
![]() | average cannot be calculated |
![]() | Test strip not inserted correctly / completely; test strip removed and not re-inserted |
![]() | Code chip from a different system |
![]() | Code chip cannot be read; code chip from a different system |
![]() | Measuring window dirty, test strip is bent / not positioned straight and flat |
![]() | Used test strip inserted, measuring window dirty, test strip not inserted correctly / completely |
![]() | Blood or control solution applied too early, test strip bent / moved, strong electromagnetic fi eld |
![]() | Code chip removed while testing was in progress |
![]() | Test strip bent / moved, test strip not inserted correctly / completely |
![]() | Meter error |
![]() | Too little blood or control solution applied |
![]() | Temperature too low or too high for testing |
This Quick Reference Guide does not replace the detailed Instructions for use for your Accu-Chek Active blood glucose meter. Please refer to the safety instructions contained in the Instructions for use.
Turning the meter on:
Press for more than 3 seconds.
Turning the meter off:
Press +
briefly at the same time.
Changing settings:
Press or hold it down.
Confirming the change and continuing with the next setting:
Press briefly.
Order of the settings
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Accu-Chek Active - Blood Glucose Meter Quick Reference Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Active that isn't answered in the manual? Leave your question here.