1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. All in One Printer
  5. Aficio 615C
  6. Operating instructions manual

Ricoh Aficio 615c Operating Instructions Manual

Copy reference
Hide thumbs Also See for Aficio 615c:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Feature Manual, Operating Instructions Manual
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the
Safety Information in "About This Machine" before using the machine.
Placing Originals
1
Copying
2
Appendix
3

Operating Instructions

Copy Reference

Advertisement

Table of Contents
loading

Related Manuals for Ricoh Aficio 615c

Summary of Contents for Ricoh Aficio 615c

  • Page 1: Operating Instructions

    Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in "About This Machine" before using the machine. Placing Originals Copying Appendix Operating Instructions Copy Reference...
  • Page 2 Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Important Contents of this manual are subject to change without prior notice.

  • Page 3: Manuals For This Machine

    Manuals for This Machine Refer to the manuals that are relevant to what you want to do with the machine. ❖ About This Machine Be sure to read the Safety Information in this manual before using the ma- chine. This manual provides an introduction to the functions of the machine. It also explains the control panel, preparation procedures for using the machine, how to enter text, and how to install the CD-ROMs provided.
  • Page 4 ❖ Other manuals • PostScript3 Supplement • UNIX Supplement • Manuals for DeskTopBinder Lite • DeskTopBinder Lite Setup Guide • DeskTopBinder Introduction Guide • Auto Document Link Guide Note ❒ Manuals provided are specific to machine types. ❒ Adobe Acrobat Reader/Adobe Reader must be installed in order to view the manuals as PDF files.

  • Page 5: What You Can Do With This Machine

    What You Can Do with This Machine <Color Functions/Color Adjustments> Color Copying You can switch the color copy mode depending on the type of originals used and the desired finish. See p.34 “Selecting a Color Mode”. ❖ Full Color Copy Copies using four colors: yellow, magenta, cyan and black.

  • Page 6: Adjusting Color

    Adjusting Color See p.39 “Color Adjustment”. ❖ Primary Colors Colors can be created by combining the 3 primary colors: yellow, magenta and cyan. Black can be made by combining yellow, magenta and cyan, how- ever, as there might be some slight differences, “black” will be expressed us- ing a black ink.

  • Page 7: Adjusting Images

    ❖ Color Balance Adjusts the overall color tone when the overall copy is reddish or bluish. See p.35 “Color Balance”. Adjusting Images See p.40 “Image Adjustment”. ❖ Sharp/Soft Adjusts the outline of an image. See p.41 “Adjusting the sharpness/softness”. ❖ Contrast Adjusts the shades of an image.
  • Page 8 ❖ Background Density Adjusts the background density of an image. See p.42 “Adjusting the background density”. ❖ Adjust U.C.R. Adjusts the amount of black ink to express vividly the black areas in an im- age. See p.42 “Adjusting the U.C.R”. AMA018S...

  • Page 9: Types Of Duplex Copies

    What You Can Do with This Machine Available functions differ depending on the model and options. Reference See p.3 “Functions Requiring Optional Configurations”. Types of Duplex Copies ❖ 1 Sided 2 Pages → 2 Sided 1 Page See p.53 “Duplex”. ❖...
  • Page 10 ❖ 1 Sided 8 Pages → Combine 2 Sided 1 Page See p.59 “Two-Sided Combine”. 1 Front 2 Back ❖ 2 Sided 2 Pages → Combine 2 Sided 1 Page See p.59 “Two-Sided Combine”. ❖ 2 Sided 4 Pages → Combine 2 Sided 1 Page See p.59 “Two-Sided Combine”.
  • Page 11 Combining Multiple Pages onto a Single Page See p.56 “One-Sided Combine”. ❖ 1 Sided 2 Pages → Combine 1 Sided 1 Page ❖ 1 Sided 4 Pages → Combine 1 Sided 1 Page ❖ 2 Sided 1 Page → Combine 1 Sided 1 Page GCSHVY7J GCSHVY8J GCSHVYOJ...
  • Page 12 ❖ 2 Sided 2 Pages → Combine 1 Sided 1 Page GCSHVYBJ Copying Originals Such as Books See p.62 “Series Copies”. ❖ Bound Originals → 1 Sided 2 Pages ❖ 2 Sided 1 Page → 1 Sided 2 Pages Copying onto an Envelope ❖...

  • Page 13: Table Of Contents

    TABLE OF CONTENTS Manuals for This Machine ...i What You Can Do with This Machine <Color Functions/Color Adjustments>...iii Color Copying ... iii Adjusting Color... iv Adjusting Images... v What You Can Do with This Machine...vii Types of Duplex Copies ... vii Notice ...1 How to Read This Manual ...2 Symbols ...2...
  • Page 14 Copy Functions...43 Adjusting Image Density ...43 Selecting Original Type Setting...43 Selecting Copy Paper ...44 Preset Reduce/Enlarge ...47 Zoom ...48 Auto Reduce/Enlarge ...50 Sort... 51 Duplex ...53 One-Sided Combine...56 Two-Sided Combine...59 Series Copies...62 3. Appendix Combination Chart...65 Supplementary Information ... 66 INDEX...

  • Page 15: Notice

    Notice Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, pass- ports, driver's licenses. The preceding list is meant as a guide only and is not inclusive.

  • Page 16: How To Read This Manual

    How to Read This Manual Note ❒ For proper use of this product, be sure to read About This Machine first. ❒ Supplementary information about the copier mode is described in “Supple- mentary Information”. Reference See p.66 “Supplementary Information”. Symbols This manual uses the following symbols: Indicates important safety notes.

  • Page 17: Functions Requiring Optional Configurations

    Functions Requiring Optional Configurations Certain functions require special machine configuration and extra options. See the table below. Function Option Duplex Unit Duplex (B&W) Duplex (Color) 2 Sided→Duplex 1 Sided→2 Sided Combine/Se- ries (B&W) 1 Sided→2 Sided Combine/Se- ries (Color) 2 Sided→1 Sided Combine/Se- ries (B&W) 2 Sided→1 Sided Combine/Se- ries (Color)

  • Page 18: Display

    Display ❖ Initial copy screen Operational status or messages. Messages and the selected tray appear here. Currently selected items appear in brackets. Reading the Display and Using Keys Selection keys Correspond to items at the bottom line on the display. Example: initial copy display •...

  • Page 19: User Tools Menu (Copier Features)

    User Tools Menu (Copier Features) This section describes items you can set in the copier feature.Copier feature screen can be displayed by pressing the {User Tools/Counter} key. For details about how to set up these items, see General Settings Guide. ❖...

  • Page 20: Copier Features

    ❖ Copier Features 5 Item Rotate Sort:Auto Continue You can continue copying when paper of the required orienta- Letterhead Setting ADS Background ❖ Copier Features 6 Item Menu Protect Description tion has run out during rotate-sorting. If you select [On] for this function, the machine rotates images correctly.

  • Page 21: Placing Originals

    This chapter describes the types of originals you can set and how to place origi- nals. Originals This section describes the types of originals that can be placed, paper sizes that are automatically detected, and missing image area. Note ❒ As the color of markers or highlighters is difficult to reproduce, the copy might not come out depending on the color or a different color might be cop- ied.
  • Page 22 Placing Originals Non-compatible originals for the ADF or ARDF Placing the following types of originals in the ADF or ARDF can cause paper misfeeds or light & black lines or result in damage to the originals. Place these originals on the exposure glass instead. •...

  • Page 23: Sizes Detectable By The Auto Paper Select

    Sizes Detectable by the Auto Paper Select Sizes detectable by the exposure glass , ADF and ARDF are: ❖ Metric version Size A3L Location of the original Exposure glass ADF or ARDF JIS: Japanese Industrial Standard If you want to make A5 paper detectable, contact your service representative. ❖...

  • Page 24: Missing Image Area

    Placing Originals Note ❒ When you copy custom size originals, make sure you specify the size of the originals. If not, the image may not be copied properly. Reference See p.16 “When Selecting the Bypass Tray or One-Sheet Bypass Tray”. Sizes difficult to detect It is difficult for the machine to detect the sizes of the following originals.

  • Page 25: Placing Originals

    Placing Originals This section describes the procedure for placing originals on the exposure glass and in the ADF or ARDF. Take care to place originals after any correction fluid and ink has completely dried. Not taking this precaution could cause marks on the exposure glass that will be copied onto paper.

  • Page 26: Placing Originals In The Adf Or Ardf

    Placing Originals Place the original face down on the exposure glass. The original should be aligned to the rear left corner. Start with the first page to be copied. Positioning mark Left scale Lower the exposure glass cover, ADF or ARDF Placing Originals in the ADF or ARDF Place originals in the ADF or ARDF.
  • Page 27 ❖ ADF Sensors Adjust the guide to the original size. Set the aligned originals face up into the ADF or ARDF. Do not stack originals beyond the limit mark. The last page should be on the bottom. Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the size of the scanned image incorrectly or dis- play a paper misfeed message.

  • Page 28: When Selecting A Paper Tray

    Placing Originals When Selecting a Paper Tray You can select either Regular or Custom for the size of the original. Regular sizes Select the paper tray using {U} or {T} keys. Press the {q} key. Select [Original Size] using {U} or {T}, and then press the {OK} key. Select [Regular Size] using {U} or {T}, and then press the {OK} key.
  • Page 29 Custom sizes Important ❒ Paper that has a vertical length of 105–297 mm (4.2”-11.6”) and a horizontal length of 128-1,260 mm (5.1”-49.6”) can be placed with this function. Select the paper tray using {U} or {T} keys. Press the {q} key. Select [Original Size] using {U} or {T}, and then press the the {OK} key.

  • Page 30: When Selecting The Bypass Tray Or One-Sheet Bypass Tray

    Placing Originals Place the originals, and then press the {Start} key. Note ❒ This function is not available in Auto Paper Select mode. ❒ If you make a mistake, press the {Clear/Stop} key, and then enter the value again. ❒ To cancel the size you have set, press the {Clear Modes} key. When Selecting the Bypass Tray or One-Sheet Bypass Tray You can select either Regular or Custom for the size of the original.
  • Page 31 Select the original size using the scroll keys, and then press the {OK} key. Place the originals, and then press the {Start} key. Note ❒ This function is not available in Auto Paper Select mode. ❒ To cancel the size you have set, press the {Clear Modes} key. Custom sizes When placing custom size originals in the ADF or ARDF, specify the size of the originals.
  • Page 32 Placing Originals Enter the horizontal size of the original (Horiz.) with the number keys, and then press the {OK} key. Enter the vertical size of the original (Vert.) with the number keys, and then press the {OK} key. Place the originals, and then press the {Start} key. Note ❒...

  • Page 33: Copying

    This chapter describes the procedure for making copies in various modes. Basic Procedure Important ❒ When User Code Authentication is set, enter your user code (up to eight dig- its) with the number keys so that the machine accepts copy jobs. See “Authen- tication Information”, General Settings Guide.
  • Page 34 Copying Press the {Start} key. The machine starts copying. When placing originals on the exposure glass, press the {q} key after all originals are scanned. Copies are delivered face down. Note ❒ Always log off when you have finished using the machine to prevent un- authorized users from using the machine.

  • Page 35: Copying From The Bypass Tray

    Copying from the Bypass Tray Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu- cent paper, postcards and copy paper that cannot be loaded in the paper trays. Important ❒ Paper has a vertical length of 90-305 mm (3.6-12 inch) and a horizontal length of 148-457.2 mm (5.9-18 inch) can be copied from the bypass tray.
  • Page 36 Copying Lift the release lever. Insert the paper face-up, and then align the paper guide to the paper size. If the guide is not flush against the copy paper, images might be skewed or paper misfeeds might occur. Do not stack paper over the upper limit mark, otherwise, images might be skewed or paper misfeeds might occur.

  • Page 37: Using The One-Sheet Bypass Tray

    Select the size and type of the paper. Place the originals, and then press the {Start} key. When the copy job is finished, press the {Clear Modes} key to clear the set- tings. Using the One-Sheet Bypass Tray You can use the one-sheet bypass tray to load OHP transparencies as well as pa- per that can be loaded in the paper trays.
  • Page 38 Copying Open the one-sheet output tray. Do not open the one-sheet output tray while the machine is in operation. Insert the paper face-up, and then align the paper guide to the paper size. Select the size and type of the paper. Place the originals, and then press the {Start} key.

  • Page 39: Copying Onto Regular Size Paper

    Copying onto Regular Size Paper Makes copies onto regular size paper from the bypass tray or one-sheet bypass tray. Select the bypass tray or the one-sheet bypass tray using {U} or {T} keys. Open the bypass tray or one-sheet bypass tray. When using the bypass tray, lift the release lever.

  • Page 40: When Copying Onto Ohp Transparencies

    Copying Place your originals. Press the {q} key. Select [Paper Size] using {U} or {T}, and then press the {OK} key. Select [Custom Size] using {U} or {T}, and then press the {OK} key. Enter the horizontal size of the original (Horiz.) with the number keys, and then press the {OK} key.
  • Page 41 Open the bypass tray. Open the one-sheet bypass tray. Open the one-sheet output tray. Insert an OHP transparency face-up, and then align the paper guide to the paper size. Be sure to load OHP transparencies in the orientation K. Press the {q} key. Select [Paper Type] using {U} or {T}, and then press the {OK} key.

  • Page 42: When Copying Onto Thick Paper

    Copying When copying onto thick paper When copying onto thick paper, select the paper type. To prevent multiple sheets from being fed at once, fan paper before placing it on the tray. Select the bypass tray or the one-sheet bypass tray using {U} or {T} keys. Open the bypass tray or one-sheet bypass tray.

  • Page 43: When Copying Onto Envelopes

    When copying onto envelopes When copying onto envelopes, select the paper type. Important ❒ Before loading envelopes, use a pen or similar to flatten their edges. Copying from the Bypass Tray ALZ050S ALZ051S...
  • Page 44 Copying ❖ Printable area The following areas of envelopes can be printed on: ALZ049S Feeding direction Printable area 8 mm (0.4 inch) 38 mm (1.5 inch) 5 mm (0.2 inch) ❖ Orientation of Originals and Envelopes Originals and envelopes must be placed in the following orientation. To minimize waste and time, check that originals and envelopes are loaded in the correct orientation.
  • Page 45 Select the bypass tray or the one-sheet bypass tray using {U} or {T} keys. Open the bypass tray or one-sheet bypass tray. When using the bypass tray, lift the release lever. When using the one-sheet bypass tray, open the one-sheet output tray. Insert the envelope face-up, and then align the paper guide to the paper size.
  • Page 46 Copying Select [Regular Size] using {U} or {T}, and then press the {OK} key. Select the envelope size ([C6 Env.L], [C5 Env.L], or [DL Env.L]) using {U} or {T}, and then press the {OK} key. Press the {q} key. Select [Paper Type] using {U} or {T}, and then press the {OK} key. Select [Envelope] using {U} or {T}, and then press the {OK} key.
  • Page 47 Lower the envelope lever, and then press [Exit]. Do not lower the envelope lever while the machine is in operation. Place the original, and then press the {Start} key. When the copy job is finished, press the {Clear Modes} key to clear the set- tings.

  • Page 48: Color Functions

    Copying Color Functions Selecting a Color Mode Select a color (or colors) that suits your originals and copying requirements. For color images, see “What You Can Do with This Machine <Color Func- tions/Color Adjustments>”. The following two color modes are available. ❖...

  • Page 49: Color Balance

    Color Balance Adjusts the overall color tone when the overall copy is reddish or bluish. Press the {q} key. Select [Color Balance] using {U} or {T}, and then press the {OK} key. Select the color you want to adjust using {U} or {T}, and then press the {OK} key.

  • Page 50: Color Balance Program

    Copying Color Balance Program You can also store the color balance setting as a color balance program and recall it when you want to use it. You can store up to three programs. Note ❒ If you want to change the registered settings, register them one more time. In this case, the previously registered contents will be changed.
  • Page 51 Reference See p.iii “What You Can Do with This Machine <Color Functions/Color Adjustments>”. See p.35 “Color Balance”. Copying with the registered settings Recalls and copies contents stored in color balance programs. Press the {q} key. Select [Color Balance] using {U} or {T}, and then press the {OK} key. Select [Program Color Balance] using {U} or {T}, and then press the {OK} key.
  • Page 52 Copying Deleting the registered settings Deletes contents stored in color balance programs. Press the {q} key. Select [Color Balance] using {U} or {T}, and then press the {OK} key. Select [Program Color Balance] using {U} or {T}, and then press the {OK} key. Select [Delete] using {U} or {T}, and then press the {OK} key.

  • Page 53: Color Adjustment

    Color Adjustment Adjusts the specific colors (yellow, red, magenta, blue, cyan and green) by mix- ing them with adjacent colors in the color circle. For types and examples of the image adjustment functions, see “What You Can Do with This Machine <Color Functions/Color Adjustments>”. You can adjust up to three colors from yellow, red, magenta, blue, cyan, or green.

  • Page 54: Image Adjustment

    Copying Reference See p.iii “What You Can Do with This Machine <Color Functions/Color Adjustments>”. Image Adjustment The following four types of image adjustments are available. ❖ Sharp/Soft Adjusts the outline of an image. ❖ Contrast Adjusts the shades of an image. ❖...
  • Page 55 Reference See p.iii “What You Can Do with This Machine <Color Functions/Color Adjustments>”. Adjusting the sharpness/softness Adjusts the outline of an image. Adjust by pressing [Soft] or [Sharp]. Press the {OK} key. Adjusting the Contrast Adjusts the shades of an image. Adjust by pressing [Low] or [High].
  • Page 56 Copying Adjusting the background density Adjusts the background density of an image. Adjust by pressing [Lighter] or [Darker]. Press the {OK} key. Note ❒ Adjustments should be made lightly when copying dark textured origi- nals, such as newspaper or recycled paper. ❒...

  • Page 57: Copy Functions

    Copy Functions Adjusting Image Density You can adjust the image density in five steps. Press the {Lighter} or {Darker} key to adjust the image density. The density indicator “ ” moves. Selecting Original Type Setting Select one of the following 2 types to match your originals: ❖...

  • Page 58: Selecting Copy Paper

    Copying Press the {Original Type} key to select the original type. The indicator of the selected original type goes on. Note ❒ See “Original Type Setting”, General Settings Guide. Selecting Copy Paper There are two ways to select copy paper: ❖...
  • Page 59 Auto Paper Select The machine selects a suitable size of copy paper automatically based on the original size and the reproduction ratio. Make sure that Auto Paper Select is selected. Note ❒ If Auto Paper Select is not selected, select [Auto Paper Select] by using {U} or {T}.
  • Page 60 Copying ❒ You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS or 11” × 17”, 8 L orientation. You cannot rotate: However, you can use: Reference See p.21 “Copying from the Bypass Tray”. See p.50 “Auto Reduce/Enlarge”. ”...

  • Page 61: Preset Reduce/Enlarge

    Preset Reduce/Enlarge You can select a preset ratio for copying. ❖ Base Point The base point of Reduce/Enlarge differs depending on how the original is scanned. When the original is set on the exposure glass, the upper left corner will be the base point. When it is set to ADF or ARDF, the bottom left corner of the original will be the base point.

  • Page 62: Zoom

    Copying Press [Enlarge] or [Reduce]. Select a ratio using {U} or {T}, and then press the {OK} key. Place your originals, and then press the {Start} key. Note ❒ See “Reproduction Ratio” and “Preset R/E Priority”, General Settings Guide. Zoom You can change the reproduction ratio in increments of 1%.
  • Page 63 To select the ratio using scroll keys Select a ratio using {U} or {T}. Select a preset ratio which is close to the desired ratio with [Enlarge] or [Re- duce]. Press [Zoom]. Select a ratio using {U} or {T}, and then press the {OK} key. Pressing {U} or {T} changes the ratio in increments of 1%.

  • Page 64: Auto Reduce/Enlarge

    Copying Enter the desired ratio with the number keys, and then press the {OK} key. Auto Reduce/Enlarge The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. Important ❒ You cannot use the bypass tray with this function. ❒...

  • Page 65: Sort

    Press [Auto R/E]. Select the paper size using {U} or {T}. Place the originals, and then press the {Start} key. Reference See p.10 “Sizes difficult to detect”. Sort Copies are assembled as sets in sequential order. Important ❒ To use the Rotate Sort function, two paper trays loaded with same size and type paper, but in different orientation (KL), are required.
  • Page 66 Copying Press the {Sort} key. Select [Sort] or [Rotate Sort] using {U} or {T}, and then press the {OK} key. Enter the number of copy sets using the number keys. Place your originals. When placing an original on the exposure glass, start with the first page to be copied.

  • Page 67: Duplex

    Changing the Number of Sets You can change the number of copy sets during copying. Important ❒ This function can only be used when the Sort function is turned on. ” is displayed, press the {Clear/Stop} key. While “ Copying... Press [Sets].
  • Page 68 Copying ❖ 2 Sided → 2 Sided Copeis 1 two-sided page onto 1 two-sided page. ❖ Original orientation and completed copies The resulting copy image will differ according to the orientation in which you place your originals (verticalK or horizontalL). The table shows the orientation of images on the front and back of copies, not the orientation of delivery.
  • Page 69 Press the {Dup/Comb/Series} key. Select the setting of original and copy type using {U} or {T}, and then press the {OK} key. Select the original orientation using {U} or {T}, and then press the {OK} key. Select the duplex orientation using {U} or {T}, and then press the {OK} key.

  • Page 70: One-Sided Combine

    Copying Note ❒ You cannot use the bypass tray with this function. ❒ The maximum paper weight that can be used with duplex copying is 60-105 g/m (16-28 lb.). ❒ When placing an original on the exposure glass, start with the first page to be copied.
  • Page 71 ❖ 2 Sided 1 Page → Combine 1 Side Copies 1 two-sided original onto one side of a sheet. ❖ 2 Sided 2 Pages → Combine 1 Side Copies 2 two-sided originals onto one side of a sheet. ❖ Orientation of originalKL and image position of combine Open to left (K) originals Open to top (L) originals GCSHVYOJ...
  • Page 72 Copying Placing originals (originals placed in the ADF or ARDF) • Originals read from left to right • Originals read from top to bottom Press the {Dup/Comb/Series} key. Select the number of originals to combine using {U} or {T}, and then press the {OK} key.

  • Page 73: Two-Sided Combine

    Select the paper size using {U} or {T}, and then press the {OK} key. Place the originals, and then press the {Start} key. Note ❒ To display the screen in step User Tools (Copier futures). If [Do not Specify] is selected, proceed to step See “Orientation”, General Settings Guide.
  • Page 74 Copying ❖ 1 Sided 8 Pages → Combine 2 Side Copies 8 one-sided originals to one sheet with four pages per side. Front Back ❖ 2 Sided 2 Pages → Combine 2 Side Copies 2 two-sided originals onto one sheet with two pages per side. ❖...
  • Page 75 Press the {Dup/Comb/Series} key. Select the number of originals to combine using {U} or {T}, and then press the {OK} key. Select the original orientation using {U} or {T}, and then press the {OK} key. Select the duplex orientation using {U} or {T}, and then press the {OK} key.

  • Page 76: Series Copies

    Copying Note ❒ To display the screens in step tion] with User Tools (Copier futures). If [Do not Specify] is selected, proceed to step . See “Orientation”, General Settings Guide. Reference See “Orientation”, General Settings Guide. Series Copies You can separately copy the front and back of a two-sided original or two facing pages of a bound original onto two sheets.
  • Page 77 ❖ 2 Sided→1 Sided Copies each side of a two-sided original onto two separate pages. Press the {Dup/Comb/Series} key. Select [Series: Book Orig.] or [Series: 2Sided Orig.] using {U} or {T}, and then press the {OK} key. When selecting [Series: Book Orig.], proceed to step Select the original orientation using {U} or {T}, and then press the {OK} key.
  • Page 78 Copying Place the originals, and then press the {Start} key. Note ❒ To display the screen in step User Tools (Copier futures). If [Do not Specify] is selected, proceed to step See “Orientation”, General Settings Guide. Reference See “Orientation”, General Settings Guide. , select [Always Specify] for [Orientation] with...

  • Page 79: Appendix

    Combination Chart A given combination of the copy features may or may not be available depend- ing on the order of its setup. Blank: : These modes can be used together. × : These modes cannot be used together. The first mode selected will be the mode you are working in.

  • Page 80: Supplementary Information

    Appendix Supplementary Information Following describes the detailed specifications of the respective functions. ❖ Bypass Tray Copy • The following paper sizes can be selected. Metric version A3L, A4KL, A5KL, B4 JISL, B5 JISKL, B6 JISL, 11” × 17”L, 8 × 14”L, 8 16KKL, C6 EnvelopeL, C5 EnvelopeL, DL EnvelopeL, 4 ”...
  • Page 81 ❖ Inch version Ratio (%) 155 (enlarge area by 2) 50 (reduce area by • You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.
  • Page 82 Appendix ❖ Duplex • Following paper sizes and orientations can be duplexed. A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 11” × 17”L, 8 • You cannot use the following copy paper with this function: • Paper smaller than A5 (A5 can be selected for Duplex) •...

  • Page 83: Index

    INDEX 1 Sided 2 Pages → Combine 1 Side 1 Sided 4 Pages → Combine 1 Side 1 Sided 4 Pages → Combine 2 Side 1 Sided 8 Pages → Combine 2 Side 1 Sided → 2 Sides 2 Sided 1 Page → Combine 1 side 2 Sided 2 Pages →...
  • Page 84 Letterhead Setting Manual Paper Select Max. Number of Sets Menu Protect Missing Image Area Non-compatible originals for the ADF or ARDF number keys OHP transparencies One-Sheet Bypass Tray One-Sided Combine Options Orientation Orientation of original Original Original Count Display Original Orientation Originals Original size Original Type Setting...
  • Page 85 In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. b means POWER OFF. ® Acrobat is a registered trademark of Adobe Systems Incorporated. Other product names used herein are for identification purposes only and might be trademarks of their respective companies.
  • Page 86 Type for SGC 1506/GS 106/LD215c/Aficio 615C EN USA B229-7657...

This manual is also suitable for:

Ld215cGs 106Sgc 1506

Table of Contents