Advertisement
Quick Links
3 Position
BATTING TEE TO GO®
ITEM NO. 1956
Parts List:
Tube (B2)
Tube (B)
(B) Tube (1pc)
(A) Base (1pc)
(B2) Tube (1pc)
®
Phase 3
(D) Storage Straps (2pcs)
(C) Upper Tube (1pc)
Replacement Part #1958-R1
Replacement Part #1956Z3
ASSEMBLY INSTRUCTIONS
Step (1) Insert Tube (B) into desired hole of Base (A).
Step (2) Pull Tube (B2) upward from inside Tube (B) and
adjust infinite height mechanism to desired height.
Step (3) Insert Upper Tube (C) onto Tube (B2)
*For Easy transportation, lower Tube (B2) into Tube (B) and
connect to Base (A) with self-stick straps around Tube (B).
BASE A
Major League Baseball trademarks and copyrights are used with
permission of Major League Baseball Properties, Inc. Visit MLB.com
C
C
Franklin Sports Inc.
Stoughton, MA 02072
Made in China
For Replacement Parts Call:
1-781-341-5178 or 1-800-225-8649
OR visit www.franklinsports.com
Advertisement
Summary of Contents for Franklin 3 Position BATTING TEE TO GO 1956
- Page 1 Base (A) with self-stick straps around Tube (B). BATTING TEE TO GO® ITEM NO. 1956 Phase 3 BASE A Parts List: Tube (B2) Franklin Sports Inc. Tube (B) Stoughton, MA 02072 (D) Storage Straps (2pcs) (C) Upper Tube (1pc) Made in China (B) Tube (1pc)
- Page 2 The Swing: Delivery: Figure 4 shows the proper “delivery” and swing plane. The correct swing is made up of four components – Address, Address: ® Establishing the Strike-Zone: To learn correct batting technique, establishing and understanding the strike-zone is paramount. Figure 1 shows that the ball must be pitched between the left and right side of home plate and pass between your shoulders and knees.