HP 17-u199 Maintenance And Service Manual page 59

3. Disconnect the WLAN antenna cables (3) from the terminals on the WLAN module.
NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal.
The WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
4. Remove the four Phillips M2.0×4.8 screws (1) and the Phillips M2.0×3.8 screw (2) that secure the power
connector cable bracket and the USB board bracket to the keyboard/top cover.
5. Remove the power connector cable bracket (3).
6. Remove the USB board bracket (4).
7. Remove the 13 Phillips M2.5×6.7 screws (1) that secure the display assembly to the keyboard/top cover.
Component replacement procedures 51