Table of Contents
Advertisement
Reverse this procedure to install the speakers.
Display assembly
Description
For use only on computer models with model numbers 17-u100 through 17-u199:
17.3-in, UHD, WLED, AntiGlare (3840×2160), flat-flat (4.0-mm), UWVA, eDP+PSR TouchScreen display
assembly equipped with HDC and webcam
17.3-in, FHD, WLED, AntiGlare (1920×1080), flat-flat (4.0-mm), UWVA, eDP TouchScreen display
assembly equipped with HDC and webcam
For use on all computer models:
17.3-in, UHD, WLED, AntiGlare (3840×2160), uslim-flat (2.68-mm), UWVA, eDP+PSR TouchScreen
display assembly equipped with f3DC and webcam
17.3-in, FHD, WLED, BrightView (1920×1080), slim-flat (3.0-mm), UWVA, eDP TouchScreen display
assembly equipped with f3DC and webcam
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the display assembly:
1.
Release the ZIF connector (1) to which the display panel cable is connected, and then disconnect
the display panel cable from the system board.
2.
Release the ZIF connector (2) to which the webcam/microphone module cable is connected, and then
disconnect the webcam/microphone module cable from the system board.
50
Chapter 5 Removal and replacement procedures
Bottom cover on page
26).
Spare part number
857436-001
857435-001
859440-001
859439-001
Battery on page
28).
Advertisement
Table of Contents
