Table of Contents
Advertisement
Speakers
Description
Speakers (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
6.
Remove the following components:
a.
Solid-state drive (see
b.
Optical drive (see
c.
WLAN module (see
d.
System board (see
Remove the speakers:
1.
Detach the piece of tape (1) that secures the speaker cable to the keyboard/top cover.
2.
Release the speaker cable from the routing clips (2) and channel built into the keyboard/top cover.
3.
Remove the speakers (3).
Bottom cover on page
Solid-state drive on page
Optical drive on page
36)
WLAN module on page
System board on page
43)
26).
Battery on page
29)
34)
Component replacement procedures
Spare part number
857834-001
28).
49
Advertisement
Table of Contents
