4
Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
Case utility tool or similar plastic, flat-edged tool
●
●
Flat-bladed screwdriver
Magnetic screwdriver
●
●
Phillips P00, P0, and P1 screwdrivers
Torx T4 screwdriver
●
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Using excessive force during disassembly and reassembly can damage plastic parts.
Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Tools required
21