Immergas 3.027290 Quick Start Manual page 2

INSTALLATION (FIG. 2 - 3 - 4): To install proceed as follows:
- Fasten the mount (3) at the height desired on the wall inserting the screws in the specific holes prepared for the screws (2) and the
dowels (1) inside the kit (Fig. 2).
- Fasten the lower support (6) in the position shown in the dra-wing (Fig. 3). Insert the screws (2) and the dowels (1), present inside
the kit, into the specific holes. Insert the 2 screws (5) present inside the kit on the lower support.
- Fasten the frame (4) on the prepared seat on the boiler using the screws (5) inside the kit (Fig. 2).
- Hang the boiler to the bracket on the wall.
- Make sure that the boiler pedestal comes into contact with the lower support as shown in the drawing (Fig. 4).
KIT COMPOSITION.
Ref.
1 Nylon dowel 12x60
2 Screw 8x80 for dowel
3 Wall-mounted boiler support
4 Frame for wall mounting boiler
5 Screws M6x15
6 Lower wall-mounted boiler support
2
3
1
2
6
5
1
Description
5
4
Qty
7
7
1
1
6
1
ASSEMBLY
8
7
a
9
Fig. 2