Immergas 3.027290 Quick Start Manual

Bracket kit for wall mounting inertial storage tank 75 litres

Download this manual

Cod. 1.042129 - Rev. ST.003678/001

BRACKET KIT FOR WALL MOUNTING

INERTIAL STORAGE TANK 75 LITRES

CODE 3.027290

GENERAL WARNINGS.

All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against

weathering.

This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in

the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in

force and principles of good practice.

Improper installation or assembly of the appliance and/or compo-nents, accessories, kit and devices can cause unexpected problems to

people, animals and objects. Read the instructions provided with the product carefully to ensure a proper installation. Installation and

maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by authorised

professionally qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.

WARNINGS:

Before making the holes to mount the bracket to the wall with the dowels supplied, we recommend referring to the main boiler

dimensions (Fig. 1) and to the related fixing seats of the frame.

MAIN DIMENSIONS

Fig. 1

Page 1 Cod. 1.042129 - Rev. ST.003678/001 BRACKET KIT FOR WALL MOUNTING INERTIAL STORAGE TANK 75 LITRES CODE 3.027290 GENERAL WARNINGS. All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against weathering. This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in force and principles of good practice.
Page 2 INSTALLATION (FIG. 2 - 3 - 4): To install proceed as follows: - Fasten the mount (3) at the height desired on the wall inserting the screws in the specific holes prepared for the screws (2) and the dowels (1) inside the kit (Fig. 2). - Fasten the lower support (6) in the position shown in the dra-wing (Fig.
Page 3 FASTENING THE LOWER SUPPORT Storage Tank 75 Litres Reference Axis Fig. 3 LOWER SUPPORT POSITION ON PEDESTAL Fig. 4...