Table of Contents
Advertisement
The manufacturer will not be held responsible in the following cases:
•
a)
Incorrect installation.
Malfunctions of the boiler to which the kit is applied.
b)
Unauthorised changes or tampering.
c)
Total or partial failure to comply with instructions.
d)
Exceptional events etc.
e)
INSTALLATION.
1.1 INSTALLATION RECOMMENDATIONS.
The installation of the kit, including the special cables and connections to the boiler, must be performed by specialized personnel.
The Authorised Technical Service Centre does not provide for the free check of the kit if it is requested after the start of the boiler
warranty.
Attention: cable-laying is excluded from the free boiler check. It is the respon-sibility of the installation company.
N.B.: follow the installation sequence below by installing first the support and then the wireless room probe and/or the concentrator
1.2 PACKAGE CONTENTS.
Ref
1
Wireless room probe
2
Concentrator for wireless room probe
3
4-Pole cable for concentrator-boiler connection
4
Screw anchors
5
Fixing screws for plastic
6
Instruction sheet for the installer
7
2 AA 1.5V batteries
3
Description
1
2
5
Qty
1
1
1
4
4
1
2
7
6
4
Fig. 1
3
Advertisement
Table of Contents
