Table of Contents
Advertisement
2.5 MAIN SIGNALS THROUGH WIRELESS PROBE LEDS
On the wireless probe there are two LEDs (1-3) next to the button (2) (Fig. 9). The possible signals on these LEDs are the following.
Status
Normal operation
N.B.: the absence of any type of flashing is a symptom of anomaly or low batteries.
Condition
Normal operation
No association
RF transmission in pro-gress
1
2
LH LED
1 flash each 60 seconds
1 flash each 4 seconds
3
RH LED
1 flash
Fig. 9
9
Advertisement
Table of Contents
