●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
To remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
2.
Lift the processor (3) straight up, and then remove it.
NOTE:
processor socket when you install the processor.
Reverse this procedure to install the processor.
ENWW
Top cover on page
Speakers on page
USB board on page
Display assembly on page
System board on page
The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the
57)
65)
67)
Power connector cable on page
71)
80)
Fan/heat sink assembly on page
69)
86)
Component replacement procedures
91