Table of Contents
Advertisement
3.
Remove the Phillips PM2.0×3.0 screw (3) that secures the fan to the system board.
4.
Remove the fan/heat sink assembly (4).
NOTE:
board components, it may be necessary to move the heat sink from side to side to detach it.
NOTE:
The following illustration shows the fan/heat sink assembly removal process on a computer model
equipped with an AMD processor.
NOTE:
The following illustration shows the fan/heat sink assembly removal process on a computer model
equipped with an Intel processor.
ENWW
Due to the adhesive quality of the thermal material located between the heat sink and system
Component replacement procedures
87
Advertisement
Table of Contents
