Touchpad - HP EliteBook 1040 Maintenance And Service Manual

3. Detach the touchpad cable (3) from the computer. The touchpad cable is attached to the top cover/
keyboard with double-sided adhesive.
To install the touchpad cable, reverse this procedure.

Touchpad

To remove the touchpad, use this procedure and illustration.
NOTE: The touchpad spare part kit includes touchpad.
Table 5-16 Touchpad descriptions and part numbers
Description
Touchpad with NFC module antenna
Touchpad without NFC module antenna
NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is included in the Cable Kit, spare
part number N09040-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the NFC module cable (see
5. Remove the touchpad cable (see
Remove the touchpad:
66 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
NFC module cable on page
Touchpad cable on page
38).
63).
65).
Spare part number
N15436-001
N09033-001
38).