Nfc Module - HP EliteBook 1040 Maintenance And Service Manual

2. Release the ZIF connector (2) the NFC module cable is connected to, and then disconnect the NFC
module cable from the NFC module.
3. Detach the NFC module cable (3) from the computer. The NFC module cable is attached to the top
cover/keyboard with double-sided adhesive.
4. Remove the NFC module cable.
To install the NFC module cable, reverse this procedure.

NFC module

To remove the NFC module, use this procedure and illustration.
Table 5-15 NFC module description and part number
Description
NFC module
NOTE: The NFC module spare part kit does not include the NFC module cable. The NFC module
cable is included in the Cable Kit, spare part number N09040-001.
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the NFC module cable (see
Remove the NFC module:
1. Release the ZIF connector (1) the NFC module cable is connected to, and then disconnect the NFC
module cable from the NFC module.
64 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
NFC module cable on page
38).
63).
Spare part number
M08706-001
38).