Advertisement

Quick Links

Spirit
APS
(Adjustable Positioning System
)
Car Seat
U. S. Patent No. 636,190S
CSS-2400S
CSS-2400M
CSS-2400L
CSS-2401M
CSS-2401L
www.inspiredbydrive.com
WARNING!
Read ALL instructions before using this product!

Advertisement

Table of Contents
loading

Summary of Contents for Drive Inspired Spirit APS CSS-2400S

  • Page 1 Spirit ™ ™ (Adjustable Positioning System ™ Car Seat U. S. Patent No. 636,190S CSS-2400S CSS-2400M CSS-2400L CSS-2401M CSS-2401L www.inspiredbydrive.com WARNING! Read ALL instructions before using this product!
  • Page 2 Please ensure that your child restraint is correctly installed by reading and following the instructions. If you require additional assistance, please call Inspired by Drive Customer Service at (800) 454-6612, or e-mail info@inspiredbydrive.com Thank you for choosing Inspired by Drive.
  • Page 3: Table Of Contents

    Table of Contents Warnings ....................4 Important Safety Information ..............6 Vehicle Seating Positions ................ 7 Child Restraint Features ................8 Vehicle Seat Belt Compatibility .............. 10 Installation: Lap-Shoulder Belt (ALR) ............ 12 Installation: Lap-Shoulder Belt (ELR) ............ 13 Installation: Lap Belt (ALR) ..............14 Installing Tether ..................
  • Page 4: Warnings

    WARNING! DEATH or SERIOUS INJURY can occur. • Use only with individuals who weigh between 25 and 130 lb (11.3 - 59 kg) and are less than 66 inches (1.67 m) in height. • Read and follow all instructions on this child restraint and in the written instructions located on the side of the child restraint.
  • Page 5 WARNING! DEATH or SERIOUS INJURY can occur. • When using this child restraint in a vehicle with side air bags, refer to the vehicle owner’s manual for installation instructions and precautions. • Do not route the vehicle seat belt over the user while using this child restraint.
  • Page 6: Important Safety Information

    IMPORTANT Safety Information This child restraint is designed to fit a wide range of individuals. To • ensure a proper fit for the user, it is important that the child restraint be correctly set up and installed before using it for the first time. •...
  • Page 7: Vehicle Seating Positions

    Vehicle Seating Positions • Do not place a child in a child restraint in the front seat of a vehicle with a passenger air bag unless the air bag is turned off. DEATH or SERIOUS INJURY can occur. • This child restraint must ONLY be used in forward-facing vehicle seats.
  • Page 8: Child Restraint Features

    Child Restraint Features A. Harness Buckle B. Swing-Away Hip Supports (optional accessories) C. Swing-Away Trunk Supports (optional accessories) D. Shoulder Harness Slots (6 on each side) E. Tension Adjuster F. Chest Retainer Clip G. Crotch Strap Slot (2 positions) H. Recline Bar...
  • Page 9 Child Restraint Features Shoulder Harness Slot (6 on each side) J. Tether Slots (4 slots located underneath cover) K. Cover L. Harness Metal Bracket M. Insertion Holes for Recline Bar N. 3-Bar Metal Bracket Fastener for Harness Assembly O. Lower Side Harness/Vehicle Belt Slots...
  • Page 10: Vehicle Seat Belt Compatibility

    Some vehicles may have seating positions or seat belts which are not compatible with this Inspired by Drive child restraint. Below are the types of vehicle seat belt retractors. Refer to your vehicle owner’s manual to determine the kind of retractors used in your vehicle...
  • Page 11 Vehicle Belt Compatibility (continued) Below are the vehicle seat belts that CAN BE USED: Continuous-loop lap-shoulder belts with a sliding latch plate. This type of seat belt consists of continuous webbing that is bolted to the vehicle on one end and has a retractor on the other end. The latch plate (the “male” part of the seat belt buckle) slides freely along the webbing to form a lap belt and a shoulder belt when attached to the buckle.
  • Page 12: Installation: Lap-Shoulder Belt (Alr)

    Installation: Lap-Shoulder Belt (ALR) Follow these instructions when installing in a vehicle with seat belts that utilize an Automatic Locking Retractor (ALR) which, when extended all the way out, the seat belt activates the locking mechanism and retracts the belt without allowing any further lengthening or slack. Always use top tether strap when installing the restraint in the vehicle.
  • Page 13: Installation: Lap-Shoulder Belt (Elr)

    Installation: Lap-Shoulder Belt (ELR) Follow these instructions when installing in a vehicle with seat belts that utilize an Emergency Locking Retractor (ELR) which allows free movement of the occupant and only locks in the event of an emergency situation, such as sudden breaking or collision.
  • Page 14: Installation: Lap Belt (Alr)

    Installation: Lap Belt (ALR) When installing the child restraint into a vehicle using only a lap belt, YOU MUST USE A TOP TETHER STRAP (see pg. 15) anchored to one of the anchor points in your vehicle. Make sure to check the Vehicle Seat Belt Compatibility (pg.
  • Page 15: Installing Tether

    Check your vehicle owner’s manual for location details. For vehicles manufactured before 2002, a bolt-in tether must be used. Contact Inspired by Drive customer service for more information. WARNING! DEATH or SERIOUS INJURY can occur.
  • Page 16 Installing the Tether (continued) Note: The tether is a REQUIRED accessory and MUST be ordered separately. Please check vehicle owner’s manual for tether anchor capacity. Vehicle owner’s manual supersedes instructions and recommendations below. 1. As noted in the child restraint installation section of these instructions (pg.
  • Page 17: Adjusting The Child Restraint

    Adjusting the Child Restraint Operating the Harness Buckle 1. To release, press the red button on the harness buckle. 2. To close, insert one metal latch into the harness buckle until it clicks. Repeat for the other metal latch. 3. Always make sure BOTH latches are properly fastened in the harness buckle when securing a user.
  • Page 18: Adjusting The Harness Fit

    Adjusting the Child Restraint (continued) Adjusting the Harness Fit 1. With the user in the child restraint, check the location of the buckle. When pulled upright, the buckle should be positioned at the level of the user’s hips, not over the stomach area. Adjust the harness to fit the clothes the child is wearing.
  • Page 19: Adjusting The Chest Retainer Clip

    Adjusting the Child Restraint (continued) Adjusting the Chest Retainer Clip The chest retainer clip keeps the shoulder straps of the harness from sliding down off the shoulders. Note: The correct height for the chest retainer clip is at the middle of the chest-level with the armpit.
  • Page 20: Securing The User In The Child Restraint

    Securing the User in the Child Restraint Once the child restraint has been properly fitted and installed in the vehicle, follow these instructions to secure the user in the child restraint. Remove bulky coats and/or jackets before putting the child in child restraint.
  • Page 21: Swing-Away Supports For Spirit Plus Models

    Swing-Away Trunk & Hip Supports for Plus Models The Spirit APS Child Restraint can be fitted with optional accessories designed to provide a customized fit for each user. Consult your therapist for proper fit. For information on how to install your child restraint’s accessories, consult the instructions that are included with each accessory.
  • Page 22: Care And Maintenance

    Care and Maintenance Cleaning the Cover • Spot clean with upholstery shampoo, foam from a mild detergent, or mild dry cleaning solvent. Do not saturate with liquid. • Pile fabrics may require brushing to restore appearance. • To clean the harness straps, use a sponge, warm water and mild detergent.
  • Page 23: Product Registration

    Product Registration FOR YOUR CHILD’S CONTINUED SAFETY Please visit our website at www.inspiredbydrive.com to register for your car seat. Although child restraint systems undergo testing and evaluation, it is possible that a child restraint could be recalled. In case of a recall, we can reach you only if we have your name and address, so please fill out the registration form to be on our recall list.
  • Page 24: Warranty

    WARRANTY WARRANTY Inspired by Drive warrants this product to be free of defects in material and workmanship. Our obligation under this warranty is limited to repair or replacement of any part or entire unit at our option for a period of one year from date of delivery to the original purchaser. The warranty does not include cost of inconvenience, property damage, misuse, abuse, crash or similar incidents.

Table of Contents