Inverter Interconnection Cable Interfaces - SolarEdge SE K Series Installation Manual

39 Inverter Interconnection Cable Interfaces
Indication
Percentage of AC
Production: 0 - 33 %
Percentage of AC
Production: 33 - 66 %
Percentage of AC
Production: 66 - 100 %

Inverter Interconnection Cable Interfaces

The cables on the right hand side of the Synergy Manager, interfaces the Synergy
Manager to the Synergy Unit of the inverter.
NOTE
Models of the Three Phase Inverters with Synergy Technology are provided
with either two or three Synergy Units. The following connection description
refers to inverter models with three Synergy Units. In inverter models with two
Synergy Units, the Manager Unit connects to the left and center Synergy Units.
To connect cables, follow the writing shown next to each cable on the panel.
Figure 12 shows the interconnecting cables of the inverter.
ON/ OFF/ P
switch
Red
position
OFF
ON (1)
OFF
OFF
Figure 12: Inverter - interconnection cables
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx
LED color
Green Blue
ON OFF
OFF ON
ON ON
Comment
This indicates
power production
as percentage of
rated peak AC
output power