SolarEdge SE K Series Installation Manual page 38

37 Front Interface of Synergy Manager
Indication LEDs
LEDs indication consists on color and state (on/ off/ blinking
(3) ). The LEDs indicate different system information, such as errors or performance.
Figure 11 shows the Indication LEDs of the Synergy Manager.
Generally, the main LED indications are:
COMM. ON - the inverter is communicating with the monitoring platform
POWER ON - the system is producing
POWER blinking - AC is connected but the system is not producing power
FAULT ON - system error
(1)
Blinking = Turns ON and OFF for the same duration
(2)
Flickering = Turns ON for 100 mS and turns OFF for 5 seconds
(3)
Alternating = Alternate LEDs flash
Figure 11: Indication LEDs
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx
(1) / flickering (2) /alternating