Designer
Designer recommends inverter and Power Optimizer selection per site size and enables
report generation. You can create a project in Designer and export the site design with
the PV array layout to the monitoring platform.
Monitoring Platform
The monitoring platform enables monitoring the technical and financial performance of
one or more SolarEdge sites. It provides past and online information on the system
performance, both at the system and PV module levels.
SetApp
SetApp is a mobile application that enables activating and configuring the inverter
through a smartphone or any mobile device.
Installation Tools and Material List
Standard tools can be used during the installation of the SolarEdge system.
The following recommend tools is required for installation:
Allen screwdriver for 5mm screw type for the inverter cover, Synergy Manager cover,
and inverter side screws
Standard flat-head screwdrivers set
Non-contact Voltage detector
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx
Chapter 1: Introducing the SolarEdge Power Harvesting
Figure 2: Synergy Manager with three Synergy Units
System 19