Three Phase Inverter With Synergy Technology - SolarEdge SE K Series Installation Manual

18 Three Phase Inverter with Synergy Technology
The inverter ON/OFF/P switch is turned OFF
The inverter AC breaker is turned OFF
Each power optimizer also transmits module performance data over the DC power line
to the inverter.
Two types of power optimizers are available:
Module add-on Power Optimizer – connected to one or more modules
Smart modules - the Power Optimizer is embedded into a module

Three Phase Inverter with Synergy Technology

The Three Phase Inverter with Synergy Technology (referred to as 'inverter' in this
manual) efficiently converts DC power from the PV modules into AC power that can be
fed into the main AC service of the site and from there to the grid. The inverter also
receives the monitoring data from each Power Optimizer and transmits it to the
SolarEdge Monitoring platform (requires a land-line or cellular connection to the
Internet).
The inverter is comprised of two or three Synergy unit inverters (depending on the
model) accompanied an external Synergy Manager unit. The Inverter may include two
or three Synergy Units, depending on the inverter's model.
The Synergy Units are connected to the Synergy Manager via AC, DC and
communication cables.
Each Synergy Unit operates independently and continues to work in case others
stopped operating.
A chain of up to 31 inverters can be set to operate together via Modbus on RS485 line.
When setting a chain of inverters, the inverter that manages communication interface
to the internet is called Leader and the rest are Followers.
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx