SolarEdge SE K Series Installation Manual page 11

10 IMPORTANT SAFETY INSTRUCTIONS / CONSIGNES DE SÉCURITÉ
IMPORTANTES
NOTE
Utility interconnection may require approval from the authority having
jurisdiction.
Approval from the authority having jurisdiction is required for making
adjustments to utility interactive setpoints.
NOTE
Solaredge inverters always opens a disconnecting means when the inverter
ceases to deliver power as a result of abnormal voltage or frequency conditions
or in response to a detected unintentional island.
NOTE
The current unbalance shall be defined as the maximum deviation of line
current on any phase, from the average line current of all phases, expressed as a
percentage.
The measured maximum inverter current unbalance is as specified in the below
table:
Model
SE43.2K
SE50K
SE66.6K
SE80K
SE100K
SE110K
SE120K
WARNING!
SolarEdge products can expose you to chemicals including antimony trioxide,
which is known to the State of California to cause cancer. For more information,
go to www.P65Warnings.ca.gov
AVERTISSEMENT!
Les produits SolarEdge peut vous exposer à des agents chimiques, y compris
trioxyde d'antimoine, identifiés par l'État de Californie comme pouvant causer
le cancer. Pour de plus amples informations, prière de consulter
www.P65Warnings.ca.gov.
% Current unbalance
phase A
2.0082
1.7511
1.3706
1.2938
2.0559
1.9407
1.9407
.
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx
% Current unbalance
phase B
0.0171
0.0978
0.0966
0.0596
0.1449
0.0894
0.0894
% Current unbalance
phase C
1.9908
1.8489
1.274
1.2342
1.911
1.8513
1.8513