Related Manuals for TP-Link NC220
Summary of Contents for TP-Link NC220
- Page 1 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi 1910012149 REV1.1.0...
- Page 2 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
- Page 3 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 4 RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs.
- Page 5 BSMI Notice 安全諮詢及注意事項 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 注意防潮，請勿將水或其他液體潑灑到本產品上。 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
- Page 6 Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
-
Page 7: Table Of Contents
CONTENTS Chapter 1 About This Guide ................... 1 Conventions ........................1 Overview of This Guide ....................1 Chapter 2 Get to Know Your Camera ..............3 Product Overview ......................3 Main Features........................ 3 Panel Appearance ......................4 2.3.1 Front Panel......................4 2.3.2 Rear Panel ...................... -
Page 8: Chapter 1 About This Guide
The camera mentioned in this Guide stands for NC220, NC230 and NC250 without any explanation. This User Guide is shared by NC220, NC230 and NC250. NC250 is used for demonstration in this guide. The difference between them are: Max Frame Rate: 30 fps for NC220 at 640x480 (VGA) and 320x240 (QVGA);... - Page 9 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Chapter Introduction Chapter 4 Configure Your Introduces how to configure the camera using the built-in web Camera management page.
-
Page 10: Chapter 2 Get To Know Your Camera
FTP whenever motion or sound is detected automatically, allowing you to remain aware of whatever is happening on the ground. With a stable high speed Wi-Fi connection of up to 300Mbps for NC220 and NC250, and 150Mbps for NC230, you can enjoy fluid video streaming with ease. In addition, the TP-LINK Cloud Camera can also expand your Wi-Fi network with its Wi-Fi Extender functionality. -
Page 11: Panel Appearance
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Wireless connectivity compliant with WPS button Instantly eliminates the dead zones and expand your home’s wireless network Ethernet port for wired connectivity ... -
Page 12: Rear Panel
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi System LED: Status Indication Flashing Red The camera starts booting up. Solid Red The camera has boot up, but is not connected to any network. - Page 13 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi The camera has been successfully added to a network by WPS Solid Green function. This process will last in the first 2 minutes.
-
Page 14: Chapter 3 Set Up Your Camera
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Chapter 3 Set Up Your Camera 3.1 Set up the Camera with the tpCamera App You can install your camera in minutes with the free tpCamera app. If your router has a WPS button, you can complete the setup wirelessly using WPS function. -
Page 15: Position Your Camera
Step 3. Add the camera to your TP-LINK cloud account. Launch the tpCamera app, log in with your TP-LINK cloud account or create one if you do not have an account. Then follow the app instructions to add your new camera to your account. - Page 16 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Unscrew the camera head. Remove the base cover. Use two screws (not included) to secure Put the base cover and camera head back the base.
-
Page 17: Chapter 4 Configure Your Camera
HD Day/Night Cloud Camera, 300Mbps Wi-Fi Chapter 4 Configure Your Camera You can use the tpCamera app and TP-LINK Cloud (http://www.tplinkcloud.com) to view and manage your camera remotely. To configure the camera’s settings, such as the network settings, cloud settings, notification delivery, you should use the camera’s built-in web management page in your local network. -
Page 18: Live View
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Enter the default username and password (admin/admin). Click Login. Create a new password for your camera to enhance security. Click OK. - Page 19 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Symbols Meaning Note Click to capture a still The image file will be saved to your local image shot by the computer.
-
Page 20: Basic
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Saturation: Drag the slider to adjust the saturation level of the camera. Large value will saturate the current displayed screen to be more colorful. - Page 21 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi...
-
Page 22: Basic > Network
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi 4.3.2 Basic > Network On this page, you can configure your camera’s IP address which is used to access and configure the camera. -
Page 23: Basic > Wireless Connection
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Primary DNS Server: Enter a DNS address in dotted-decimal notation. Secondary DNS Server: Enter a DNS address in dotted-decimal notation. - Page 24 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi To connect your camera to a wireless network, follow the steps below: Click Scan to scan the available wireless network and to refresh the Wireless Network List.
-
Page 25: Basic > Cloud Setting
Note: You can register a TP-LINK Cloud account in the tpCamera app only. If you do not get a tpCamera app, please refer to the Step 2 Download and install the tpCamera app in Set up the Camera with the tpCamera APP. -
Page 26: Basic > Led
NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Account: Enter your TP-LINK Cloud account, either E-mail address or username is allowed. Password: Enter your TP-LINK Cloud account’s password. Camera Name: The default value is the camera model. You can change it to an ... -
Page 27: Advanced > Status
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi 4.4.1 Advanced > Status Refer to 4.3.1 Basic > Status. 4.4.2 Advanced > Network On this page, you can configure the network settings of the camera. - Page 28 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi On this section, you can configure your camera’s IP address which is used to access and configure the camera. Dynamic IP: Select this option when a DHCP server is installed on the network to issue IP ...
-
Page 29: Advanced > Wireless Connection
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Primary DNS Server: Enter a DNS address in dotted-decimal notation. Secondary DNS Server: Enter a DNS address in dotted-decimal notation. - Page 30 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi On this page, you can either scan a wireless network to connect to or enter a wireless network’s parameters manually. To scan a wireless network, refer to 4.3.3 Basic >...
-
Page 31: Advanced > Wireless Extender
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Note: The name must be exactly the same as that used in the wireless access point, or the connection will not be established. Leaving this field blank means the camera will attempt to access the nearest open network. -
Page 32: Advanced > Cloud Setting
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Same as Host: The extended network will use the same name and settings as your Host network. Your devices can use the same wireless information to connect to both the host and extended networks. - Page 33 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Coding Format: Displays the video coding format of the camera. Resolution: Displays the video resolution of the camera. Higher resolution offers better ...
-
Page 34: Advanced > Motion Detection
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Time Stamp&On-Screen Display (OSD): If enabled, the current time of your camera, which can be set on the System > Date/Time page, will be displayed on the Live View screen. -
Page 35: Advanced > Sound Detection
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Motion Detection: To enable or disable the motion detection function. The area with blue mask indicates that it is the area with motion detection on. All areas are selected by default. -
Page 36: Advanced > Notification Delivery
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Sound Detection: To enable or disable the sound detection function. Sensitivity: Specify the level of difference between current sound and the threshold you set. - Page 37 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Select FTP, you can configure your camera to send snapshots to a specified FTP sever on the following screen: FTP Server/ Port: Enter the IP or the domain (IP/domain without prefix ftp://) and the port of ...
- Page 38 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Enter an IP address or domain of your FTP server, e.g. 192.168.1.168 Remain the FTP port number as the default value: 21.
- Page 39 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Recipient E-mail Address: Enter the receiver’s E-mail address that the notification E-mail will be sent to. Click Add recipient to add receiver’s E-mail addresses. You can specify up to four recipient E-mail addresses.
-
Page 40: Advanced > Led
HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Enter the receiver’s E-mail address in Recipient E-mail Address, e.g. test@tp-link.com. Enter your E-mail address in Sender E-mail Address, e.g. test@gmail.com. Enter the password required to access the SMTP server. -
Page 41: Account
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi 4.5.1 Account On this page, you can change the administrator’s password and manage the user account(s) that are allowed to access to your camera. - Page 42 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Enter a username for your new account. Enter a password for your new account. The password should contain 5 to 20 characters.
-
Page 43: Date/Time
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Enter the current password in the Old Password textbox. Enter a new password. Enter the new password again to confirm it. - Page 44 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Current Time: Displays the current date and time of the camera. Time Zone: Select the time zone for the region where the camera is installed.
-
Page 45: Management
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Copy Your Computer’s Time Settings: Click this button to copy your computer’s current time settings. Click Save to save and enable the settings. -
Page 46: System Log
Update: Before update, download the latest firmware from the product page at http://www.tp-link.com, and then use decompression software to extract the file. Click Browse to locate the latest downloaded software file, and then click Upgrade to update the camera’s software to the latest version. - Page 47 NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi NC230 HD Day/Night Wi-Fi Cloud Camera NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi Time: Displays the time when the log event occurs. The log can get the correct time after you configure on the Date/Time page. (go to Advanced > Date/Time) Module: Displays the module to which the log information belongs.