Handling And Safety Instructions; Installation - SolarEdge Home Battery 48V Installation Manual

4 Handling and Safety Instructions

Handling and Safety Instructions

Read these instructions carefully before installing or operating the SolarEdge Home
Battery 48V (referred to as the Battery or Battery Pack ). Failure to do so or to follow any
of the instructions or warnings in this document can result in electrical shock, serious
injury, or death, or may damage the battery and other property.
Failure to abide by these instructions may void your warranty!
Do not discard this document! After installation, keep it adjacent to the battery for
future reference!

Installation

WARNING!
Install the battery according to national and local codes and standards and in
locations compliant with local building codes and standards.
WARNING!
The battery installation must be carried out only by qualified electricians who
have been trained in handling low voltage electricity works.
WARNING!
The battery module is heavy. Adhere to local regulations for material handling
and heavy lifting, when installing heavy equipment.
WARNING!
Do not install the battery in habitable spaces, including sleeping rooms.
WARNING!
Make sure the mounting surface can sustain the total weight of the battery
module and mounting bracket.
WARNING!
Do not install the battery, if it has been dropped, crushed, or has signs of
physical damage.
WARNING!
When the battery is installed in a residential environment, fire detection and
protection equipment must be installed in accordance with local building and
fire codes.
WARNING!
Do not install the battery near heating equipment, ignition sources, or open
flames.
WARNING!
Install the battery only on non-combustible surfaces and under non-
combustible ceilings, overhangs, or eaves.
Home Battery 48V Installation Guide MAN-01-00954-1.1