Table of Contents
Advertisement
a.
Remove the three Phillips M2.5 × 2.5 screws (1) from the bottom of each hinge.
b.
Remove the display hinges from the enclosure (2).
The display hinges are available as spare part number L24470-001.
7.
To remove the display/webcam cable, lift the tape from atop the connector on the webcam module (1),
and then disconnect the cable from the webcam module (2). Lift the cable from the display enclosure to
disengage the adhesive that secures it (3).
The display/webcam cable is available as spare part number L24492-001 for models with HD panels and
L24493-001 for models with FHD panels.
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
