Table of Contents
Advertisement
2.
Flex the inside of the top edge (1), left and right sides (2), and the inside of the bottom edge (3) of the
display bezel until the bezel disengages from the display enclosure.
3.
Remove the display bezel (4).
The display bezel is available as spare part numbers L56980-001 for models without a webcam and
L56981-001 for models with a webcam.
4.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Lift the webcam module to disengage the adhesive that secures the module to the display (1).
Component replacement procedures
51
Advertisement
Table of Contents
