Solid-State Drive - HP 340 G5 Maintenance And Service Manual

Solid-state drive

Table 5-7 Solid-state drive descriptions and part numbers
Description
Solid-state drive, 512 GB, PCIe
Solid-state drive, 256 GB, PCIe
Solid-state drive, 256 GB, SATA-3
Solid-state drive, 128 GB, SATA-3
Optane memory module, 16 GB
Solid-state drive bracket
Solid-state drive board
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to install the solid-state drive.
Computer feet on page
Bottom cover on page
Battery on page
Solid-state drives are designed with notches to prevent incorrect insertion.
(Preparation for disassembly on page
27).
29).
31).
Spare part number
L25984-001
L25983-001
L56986-001
L25981-001
L34406-001
L24488-001
L24487-001
27).
Component replacement procedures 37