HP ProBook 450 G10 Maintenance And Service Manual page 49

Table of Contents

Advertisement

1.
Carefully disconnect the two antenna cables from the module (1).
2.
Remove the Phillips M2.0 × 2.5 screw (2), and then remove the WLAN module (3).
NOTE:
Models have either one or two WLAN antennas. On models with two antennas, the #1 white
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna
cable connects to the WLAN module #1 Aux terminal.
3.
If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective
sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse this procedure.
WLAN module
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents