Miracle-Ear Miracle-EarENERGY 2 iRIC R AX User Manual page 9

Turning on and off
The following options are available to turn your hearing aids on
and off.
Via charger: Charger must be connected to the power supply.
 Turning on: Take the instruments out of the charger.
 The startup melody is played in your hearing aids. The default
volume and hearing program are set.
 Turning off: Place the hearing aids in the charger.
Switching to standby mode
Standby mode mutes the hearing aids but does not turn them off.
 Switch to standby mode using a remote control or the app.
• Settings return to previous when coming out of standby mode
 Switch to standby mode using charger. Turn hearing aids off and
on again by placing in charger until one or more orange LEDs
light up
• Settings return to default when coming out of standby mode
16
Adjusting the volume
Your hearing aids automatically adjust the volume to your situation.
 To change volume manually, use a remote control option.
An optional signal can indicate the volume change. Once the
maximum or minimum volume has been reached, you may hear a
signal tone.
Changing hearing programs
Your hearing aids automatically adjust based on the listening
situation, environment and surroundings.
Your hearing aids may also have several hearing programs set by
your hearing care professional to allow you to change the sound,
if needed.
To change the hearing program, use a remote control option.
An optional signal tone can indicate the program change. Default
volume is applied.
Additional optional controls may be available for your hearing aids.
Please discuss with your hearing care professional.
17