Cub Crafters CARBON CUB SS Maintenance Manual page 69

1 GENERAL
The aircraft is powered by an AEC Titan 340CC engine. This is an air-cooled, four cylinder
powerplant that is capable of delivering up to 180 hp at 2700 RPM for less than 5 minutes, and
a constant 80 hp at given altitude and RPM settings.
A throttle controls power to the engine. There is a forward and aft throttle control on the left side
of the cockpit. The aft throttle control is optional on some models. The air-to-fuel mixture is
adjusted manually with a control on the left side of the instrument panel. Pulling the mixture
control all the way back operates a cut-off valve on the carburetor that stops the supply of fuel to
the engine. The mixture control should always be used to stop the engine.
2 ENGINE SERVICING
Refer to Section 6.3.10 and to AEC Titan 340CC Engine Manual by AEC for servicing,
maintenance, and overhaul of the engine.
3 ENGINE MAINTENANCE
No major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are
authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.9
Page: 2
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10020AMM
Date: 12/18/2013