Cub Crafters CARBON CUB SS Maintenance Manual page 57

1. GENERAL
The wing is covered with fabric, has two extruded aluminum spars, pressed aluminum ribs, and
aluminum leading and trailing edge skins. Rigidity is provided by drag wires and drag braces.
The left or right wing panels may house optional landing lights. A stall warning vane is installed
on the leading edge of the left wing. The wing incorporates slotted wing flaps inboard of the
ailerons.
2. MAINTENANCE
Refer to Section 6.3.4 for maintenance and servicing of the wings. No major repair or
alterations, as outlined in ASTM F2483, FAR 43, or in this manual are authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.3
Page: 2
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10020AMM
Date: 12/18/2013