Anker 555 (PowerHouse 1024Wh) - Portable Power Station Manual

What's in the Box

Overview

Recharging Your Product

DC recharging (200W Max)
Recharge your power station by connecting to a wall outlet with the 200W AC adapter.

Solar panel recharging (200W Max)
Recharge your power station by connecting up to 2 100W solar panels in parallel with a solar charging cable and an XT60-DC7909 connector.

USB-C recharging (100W)
Recharge your power station by connecting it to a charger via the USB-C port.

Car recharging (120W Max)
Recharge your Power Station by connecting to a car's output port with the car charging cable.


When your portable power station only has 1% battery remaining, the Remaining Battery indicators will flicker to remind you to recharge the product.

Powering Your Devices

AC charging
Press the AC button and connect your devices to the AC output ports.

Car socket charging
Press the button on the car socket, connect your devices, and start charging.

Power Saving Mode

Switching on the power saving mode prevents wasting power by automatically turning off the Power Station once all your devices are fully charged.
Switching off the power saving mode will enable stable charging over an extended period, such as for timelapse photography or for sleeping with a CPAP machine.

Light

Ambient light
Press the button once to turn on the ambient light. Press one more time to turn it off.

SOS mode
Press and hold the button for 2 seconds to turn on SOS mode.

LCD Screen Guide

1. 
   LCD Screen Button
   Press the button to turn on the LCD screen.
2. 
   Power Saving Mode
3. 
   High-Temperature Alert
   • When this icon shows, stop using the product and leave it to cool down until the icon disappears.
4. 
   Low-Temperature Alert
   • When this icon shows, stop using the product until the icon disappears.
5. 
   USB-C Output/ Input Port
6. 
   USB-A Output Port
7. 
   Car Charging
8. 
   AC Charging and Voltage Frequency
   Press the AC output port on/off button for 2 seconds to switch the frequency.
9. 
   Remaining Battery
10. 
    Time to Recharge / Remaining Battery in Hours
11. 
    Current Input Power
12. 
    Current Output Power

Trouble Shooting

AC charging failure

If AC charging is unavailable, it's possible that the connected devices exceed 1000W. Try unplugging one or more of the connected devices to see if this resolves the issue.

Resetting your Power Station

If your power station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the Power Station still doesn't work, please contact support@anker.com.

FAQ

Q1: Why does the power station's battery drain even when no devices are connected?
When the AC or Car Socket control button is turned on, even if no devices are being charged, there will still be a certain amount of no-load power consumption. To avoid this, make sure the AC and Car Socket charging buttons are off or turn on the power saving mode when you're not using the Power Station.

Q2: What's the max power output of the AC output ports?
The AC output ports can deliver a maximum of 1000W to connected devices.

Q3: Can I recharge the product while charging connected devices?
Yes.

Q4: Can this product power a CPAP machine?
Yes, but make sure to turn off the power saving mode first.

Q5: What kind of solar charger can charge this product?
Any 11-28V solar charger with an DC7909 connector.

Specifications

Cell Capacity	1024 Wh
DC Input	200W Max
Solar Panel Input	11-28V 10A(200W Max)
Car Charger Output	12V 10A
AC Output	110V 9.09A, 50Hz/60Hz, 1000W Max
USB-A Output	5V 2.4A (2.4A Max Per Port)
USB-C Output/ Input (100W)	5V 3A/9V 3A/15V 3A/20V 3A/20V 5A (100W Max)
USB-C Output (60W)	5V 3A/9V 3A/15V 3A/20V 3A (60W Max)
Discharging Temperature	-4°F-104°F / -20°C-40°C
Charging Temperature	32°F-104°F / 0°C-40°C
Size	13.8 x 11.6 x 7.4 inch/ 350 x 295 x 188 mm
Net Weight	13.1 kg/28.9 lb
Gross Weight	16.1 kg/35.5 lb

Attention

Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product.

• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose the product to rain or snow.
• Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury to persons.
• To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
• Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
• Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosion.
• To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts.