Transmitter Parts; Figure 2 Indigo300 Transmitter Parts - Vaisala Indigo300 User Manual

Indigo300 User Guide
2.2 Transmitter parts
1
2
3
4
5
6
Figure 2 Indigo300 transmitter parts
1 Display
2 Push button for transmitter display navigation
3 LED status indicator. Lights up when the display is turned off.
4 Locking wheel with a connector for probe or probe cable. Alternatively, this lead-through
can be ordered with a fixed cable and M16×1.5 cable gland pre-installed.
5 Lead-through for cables. Plugged, or equipped with a M16×1.5 cable gland or an NPT 1/2"
conduit fitting.
6 Lead-through for cables. Plugged, or equipped with a M20×1.5 cable gland or an NPT 1/2"
conduit fitting.
7 Grounding terminal
8 Service port for connection to Insight PC software or Indigo80 handheld indicator
9 Rubber lead-through for cables, at the back
10 Transmitter base: mounting base and screw terminals for cables
11 Top cover: display and circuit board
The lead-through options (locking wheel, cable glands, conduit fittings, and plugs) are
selected when ordering the transmitter.
10
7
8
M212849EN-A
11
10
9