Cub Crafters CC11-100 Maintenance Manual page 71

10 Tailwheel Attachments:
- Visual inspection for tightness and safety.
11 Tailwheel Fork:
- Visual inspection for looseness on bracket.
12 Tailwheel tire:
- Visual inspection for cuts and uneven or
excessive wear.
Landing Gear Group
13 Tailwheel:
- Remove, clean, and visually inspect for
damage and corrosion
- Functionally check tail wheel swivel lock
- Repack bearings (if applicable).
14 Tailwheel Tire Pressure (applicable to the optional
tailwheel only):
- Verify pressure.
15 Lubricate per Chapter 6.2
Return To Service
1 Install engine cowling.
2 Install fuselage and empennage access panels.
3 Install wing access panels.
4 Verify oil level is 6 quarts.
5 Perform engine run-up in accordance with
operational / functional check:
- After completing, perform a walk around to
detect fluid leaks or other discrepancies.
6 Verify all Cub Crafters' Service Letters, Bulletins,
and Instructions are complied with.
7 Verify the aircraft's documentation is in order:
- Airworthiness Certificate
- Registration
- Pilot's Operating Handbook and Aircraft Flight
Manual
- Weight and Balance
- Equipment List
Operational/Functional Inspection Report
Manual number SC10000AMM
Date: 05/08/23
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
X
X
X
Interval
Ref.
100 Special
X
X
X
Interval
Ref.
100 Special
X
X
X
X
X
X
X
Initials
Initials
Initials
Notes
6.A
Page: A9