Cub Crafters CC11-100 Maintenance Manual page 66

Engine Group
34 Starter:
- Visual inspection for condition and security.
35 Engine Controls:
- Check travel from stop to stop and lubricate.
36 Engine Cowl:
- Install, ensuring good clearance.
Propeller Group – Metal
THIS INSPECTION SHEET IS APPLICABLE TO A METAL PROPELLER.
1 Spinner and Bulkheads:
- Visual inspection for damage and security.
2 Propeller Blades:
- Visual inspection for nicks and cracks.
3 Spinner Mounting Brackets:
- Visual inspection for damage and security.
4 Propeller Mounting Bolts:
- Visual inspection
- Check torque, if safety wire is broken.
Propeller Group - Wood
THIS INSPECTION SHEET IS APPLICABLE TO A WOOD PROPELLER.
1 Spinner and Back Plate:
- Visual inspection for damage and security.
2 Propeller Hub and Blades:
- Visual inspection for nicks and cracks
3 Propeller Mounting Bolts:
- Torque verification after 1st flight, 25 hours,
and every 50 hours thereafter or should the
operating environment change.
Cabin Group
1 Doors:
- Visual inspection for damage, operation, and
security.
2 Door latches and hinges:
- Visual inspection and lubricate.
3 Cabin Windows and Windshield:
- Clean and visual inspection for cracking,
crazing, and general condition.
6.A
Page: A4
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
X
Interval
Ref.
100 Special
X
X
X
X
50 hours
50 hours
1st FLT.,
25 hours,
50 hours,
environ.
Interval
Ref.
100 Special
X
X
X
Manual number SC10000AMM
Initials
Initials
Initials
Date: 05/08/23