Cub Crafters CC11-100 Maintenance Manual page 56

1 GENERAL
The engine cowl is made in two pieces and can be removed without the propeller having to
come off. The upper and lower portions are made of composites using fire-resistant resins.
1.1. ENGINE COWL
(1) REMOVAL
(a) Remove the screws that hold the upper cowl to the lower cowl and the fuselage.
(b) Carefully remove the upper cowl.
(c) Remove the access panel on the lower cowl.
(d) Remove the screws that hold the lower cowl to the fuselage.
(e) Disconnect the induction tubing.
(f) Carefully remove the lower cowl.
6.3.14
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.14.1 Engine Cowl
Manual number SC10000AMM
Date: 05/08/2023