8.
AILERONS
(1) REMOVAL
Refer to Figure 6.3.6.9
(a) Disconnect both aileron control cables from the upper and lower aileron horns.
(b) Remove the bolts while firmly holding the aileron.
(c) Carefully remove the aileron from the wing panel.
(2) INSTALLATION
1- Bolt
4- Nut
Refer to Figure 6.3.6.10
(a) Position the ailerons on the wing panels and secure with the bolts (1), washers (2
& 3), nuts (4) and cotter pins (5).
Manual number SC10000AMM
Date: 05/08/2023
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.6.9
Aileron Installation
2- Washers
5- Cotter Pin
Figure 6.3.6.10
3- Washer
Aileron Hinge
6.3.6
Page: 11