Cub Crafters CC11-100 Maintenance Manual page 4

List of Effective Pages
Rev Pages
NC
All Initial Issue
A
All Reformatted to meet ASTM F 2483-05.
B Added Maintenance Table and
6.1
clarification
C
All Entire Manual Revised
6.A.A3 Added Exhaust Bolt Check to Engine
D
Group.
11.2 Added 11.4 for Obtaining Latest Safety
Information.
5.2 Pg 3 Updated Figure 5.2.1
E
Pg 4 Revised to correct dimensions.
Pg 8 Removed O-200-D from Engine Specs.
Pg 12 Updated 8.6 for Metal and Composite.
5.4.7 Pg 2 Clarified Tire Options.
5.4.8 Pg 2
Updated engine photo.
5.4.11 Pg 2
Updated Propeller list.
5.4.13 Updated all Avionic Information.
Pg. ALL Added antenna locations.
5.4.14 Updated all schematics for Avionics,
Pgs 3 - 10 Intercoms, Dynon and Lighting Options
5.6 Pg 2 Updated Painting.
6.1 Pg. ALL
Updated Authorization Table
6.2 Pg 3 Updated Tire PSI chart
6.3.1 Pg 2 Added ME-406 ELT
6.3.8 Pg 3 Revised Figure 6.3.8.1.
Pg 5 Revised bolt and washer quantities.
Pg 6 Revised title to "3200-Type".
6.3.10
Updated Troubleshooting chart for
Pg 2 - 4 Engine does not start, rough running,
6.3.11 and Note.
Pg 2 - 14 Renamed 2.1 to Pin Vice Throttle Cable.
6.3.16 ALL Added 2.2 for Heavy Duty Throttle
Cable.
6.3.17
Reformatted Sections to General, Wood
Pg 5 - 9 Propeller, and Maintenance.
6.3.19 Added Needle Bearing info and Figure
Pg 3 - 4 6.3.17.2. Updated battery information.
Reformatted Sections to Landing and
6.3.24 Taxi Lights, Incandescent NAV/Anti-
Pgs 2, 4-5
Collision, and LED NAV/Anti-Collision.
6.A Pg A1 Added Propeller position for storage and
Pg A5 mooring.
Pg A9 Revised Oil to 6 quarts.
Added ME-406 ELT.
Revised Oil Quantity to 6 quarts.
0
Page: ii
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Change
Prepared
Date
By
07/06/2006 BdB
08/09/2006 MO
01/29/2008 SJT
04/27/2009 SJH
07/10/2009 SJT
08/02/2010 SJT
Manual number SC10000AMM
Approved
By
BdB
DAS
SJH
SJH
SJH
SJH
Date: 05/08/2023