Rudder; Removal - Cub Crafters CC11-100 Maintenance Manual

2.

RUDDER

1 - Springs

(1) REMOVAL

Refer to Figure 6.3.5.1
(a) Unhook the tail wheel steering springs (1) from the rudder arm.
(b) Disconnect the rudder cables (2) from the rudder horn.
(c) Remove the rectangular inspection cover and disconnect the electrical wiring to
the tail assembly (3).
(d) Remove the hinge pins (4) and separate the rudder assembly from the fin.
Manual number SC10000AMM
Date: 05/08/2023
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
2 - Cables 3 - Wiring
Figure 6.3.5.1 Rudder Installation
4 - Hinge pins
6.3.5
Page: 3