Inspection; Fuselage; Tail Surfaces - Cub Crafters CC11-100 Maintenance Manual

1.

INSPECTION

(1) FUSELAGE

(a) Visually inspect the fuselage longeron tubing and stringers for damage and
corrosion.
(b) Inspect all pulleys, guides, and fairleads for damage, cracks, or misalignment.
(c) Check that the pulleys turn freely.
(d) Replace damaged pulleys that bind, and guides or fairleads that are cracked.
(e) Check all control cables for wear or corrosion.
(f) Inspect all turnbuckles and turnbuckle terminals for cracks, corrosion, improper
safety, and freedom of movement.
(g) Damaged turnbuckles and control cables must be replaced.

(2) TAIL SURFACES

(a) Inspect the steel structure for damage or pitting from corrosion.
(b) Check the control surfaces for minor damage such as tears or holes in the fabric.
(c) Repair fabric in accordance with Section 6.4.
(d) Examine all drain holes. These must be kept open at all time so that
accumulations of moisture will drain out of the control surfaces.
6.3.5
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 05/08/2023