5.7.8 Advanced Multicast
Note
The settings on this tab are only visible when in Sender or Receiver multicast mode.
The default pre-populated multicast addresses above will work in most cases and should only be altered for rare
cases.
Transmitter Settings
Transmitter Output Codec
This is the audio encoding format used by the Transmitter device when sending output to the Receivers.
AL061-UG-GP258410-001-R0
8420 IP Dual-Sided Display Speaker
Figure 20: Advanced multicast - transmitter settings
support@algosolutions.com
8410 IP Display Speaker &
Page 72