Algo 8410 User Manual page 71

8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
ICE – TURN Server
Enter the IP address or domain of the ICE server.
ICE – TURN User
Enter the username.
ICE – TURN Password
Enter the password.
STUN - Server
Enter the IP address or domain of the STUN server.
Server Redundancy
Server Redundancy Feature
Two secondary SIP servers may be configured. The 8410/8420 will attempt to register with the primary server but
switch to a secondary server when necessary. The configuration allows re-registration to the primary server upon
availability or to stay with a server until unresponsive.
If Server Redundancy is selected the web page will expand as shown below.
Backup Server #1
If the primary server is unreachable, the 8410/8420will attempt to register with the backup servers. If enabled, the
8410/8420 will always attempt to register with the highest priority server.
Backup Server #2
If backup server #1 is unreachable, the 8410/8420will attempt to register with the 2nd backup server. If enabled, the
8410/8420 will always attempt to register with the highest priority server.
Polling Intervals (seconds)
The time period between sending monitoring packets to each server. Non-active servers are always polled, and active
server may optionally be polled (see below).
Poll Active Server
Explicitly poll current server to monitor availability. This may also be handled automatically by other regular events
and can be disabled to reduce network traffic.
Automatic Fallback
This enables device to reconnect with a higher priority server once available, even if the backup connection is still fine.
AL061-UG-GP258410-001-R0 support@algosolutions.com Page 70