Algo 8410 User Manual page 70

Ip display speaker, ip dual-sided display speaker
Table of Contents

Advertisement

8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
General
SIP Transportation
Which transport layer protocol to use for SIP messages. Setting 'SIP Transportation' to 'TLS', ensures the encryption of
SIP traffic.
SIPS Scheme
Only visible when 'SIP Transportation' set to 'TLS'. Enabling SIPS Scheme requires the SIP connection from endpoint to
endpoint to be secure.
Validate Server Certificate
Validate the SIP server against common certificate authorities.
SIP Outbound Support (RFC 5626)
Enable this option to support best networking practices according to RFC 5626. This option should generally be
enabled if the Algo device is being registered with a hosted server or if TLS is being used for SIP Transportation.
Outbound Proxy
IP address for outbound proxy. A proxy (server) stands between a private network and the internet.
Register Period (seconds)
Maximum requested period of time where the 8410/8420 will re-register with the SIP server. Default setting is 3600
seconds (1 hour). Only change if instructed otherwise.
SRTP
SDP SRTP Offer
Setting 'SDP SRTP Offer' to 'Optional', means the SIP call's RTP data will be left unencrypted if the other party does not
support SRTP. Setting 'SDP SRTP Offer' to 'Standard', encrypts RTP voice data, meaning the normal audio RTP packets
will now be secure (SRTP). This means SIP calls will be rejected if other party does not support SRTP. The 'Standard'
option secures the audio data between parties, by making sure that it's not left out in the open for third parties to
later reconstruct and listen to.
NAT
Media NAT
IP address for STUN server if present or IP address/credentials for a TURN server.
AL061-UG-GP258410-001-R0
support@algosolutions.com
Page 69

Advertisement

Table of Contents
loading

Table of Contents